brcm2708: rename target to bcm27xx

[openwrt/openwrt.git] / target / linux / brcm2708 / patches-4.19 / 950-0473-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0473-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch b/target/linux/brcm2708/patches-4.19/950-0473-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch
deleted file mode 100644 (file)
index 15af5a7..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0473-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From dc2550fdfd0a46c3ec67e5003b3d69c29141406b Mon Sep 17 00:00:00 2001
-From: Jonathan Bell <jonathan@raspberrypi.org>
-Date: Fri, 17 May 2019 13:31:21 +0100
-Subject: [PATCH] phy: bcm54213pe: configure the LED outputs to be more
- user-friendly
-
-The default state was both LEDs indicating link speed.
-
-Change the default configuration to
-- Amber: 1000/100 link speed indication
-- Green: link present + activity indication
-
-Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
----
- drivers/net/phy/broadcom.c | 17 +++++++++++++++++
- include/linux/brcmphy.h    |  4 ++++
- 2 files changed, 21 insertions(+)
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -52,6 +52,21 @@ static int bcm54210e_config_init(struct
-       return 0;
- }
- 
-+static void bcm54213pe_config_init(struct phy_device *phydev)
-+{
-+      u16 val;
-+
-+      /* Enable ACT+LINK indication on ACTIVITY trigger */
-+      val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_LEDCTL);
-+      val |= BCM54XX_SHD_LEDCTL_ACTLINK_EN;
-+      bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDCTL, val);
-+
-+      /* Set ACTIVITY on LED "1" output, LINKSPD[1] on LED "3" output */
-+      val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
-+              BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD1);
-+      bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
-+}
-+
- static int bcm54612e_config_init(struct phy_device *phydev)
- {
-       int reg;
-@@ -310,6 +325,8 @@ static int bcm54xx_config_init(struct ph
-               err = bcm54210e_config_init(phydev);
-               if (err)
-                       return err;
-+      } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54213PE) {
-+              bcm54213pe_config_init(phydev);
-       } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
-               err = bcm54612e_config_init(phydev);
-               if (err)
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -168,6 +168,10 @@
- #define  BCM54XX_SHD_SCR3_DLLAPD_DIS  0x0002
- #define  BCM54XX_SHD_SCR3_TRDDAPD     0x0004
- 
-+/* 01001: Additional LED trigger options */
-+#define BCM54XX_SHD_LEDCTL            0x09
-+#define  BCM54XX_SHD_LEDCTL_ACTLINK_EN        0x0010
-+
- /* 01010: Auto Power-Down */
- #define BCM54XX_SHD_APD                       0x0a
- #define  BCM_APD_CLR_MASK             0xFE9F /* clear bits 5, 6 & 8 */