brcm2708: rename target to bcm27xx

[openwrt/openwrt.git] / target / linux / brcm2708 / patches-4.19 / 950-0638-drm-connector-Add-documentation-for-drm_cmdline_mode.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0638-drm-connector-Add-documentation-for-drm_cmdline_mode.patch b/target/linux/brcm2708/patches-4.19/950-0638-drm-connector-Add-documentation-for-drm_cmdline_mode.patch
deleted file mode 100644 (file)
index 16b84bc..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0638-drm-connector-Add-documentation-for-drm_cmdline_mode.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 7c0f4f4d81958f63abf696e71b342e8b75a6e530 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@bootlin.com>
-Date: Wed, 19 Jun 2019 12:17:48 +0200
-Subject: [PATCH] drm/connector: Add documentation for drm_cmdline_mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 772cd52c5574b04b00a97d638b2cfe94c0c1a9b6 upstream.
-
-The struct drm_cmdline_mode holds the result of the command line parsers.
-However, it wasn't documented so far, so let's do that.
-
-Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Link: https://patchwork.freedesktop.org/patch/msgid/963c893c16c6a25fc469b53c726f493d99bdc578.1560783090.git-series.maxime.ripard@bootlin.com
----
- include/drm/drm_connector.h | 86 ++++++++++++++++++++++++++++++++++++-
- 1 file changed, 84 insertions(+), 2 deletions(-)
-
---- a/include/drm/drm_connector.h
-+++ b/include/drm/drm_connector.h
-@@ -755,18 +755,100 @@ struct drm_connector_funcs {
-                                  const struct drm_connector_state *state);
- };
- 
--/* mode specified on the command line */
-+/**
-+ * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line
-+ *
-+ * Each connector can have an initial mode with additional options
-+ * passed through the kernel command line. This structure allows to
-+ * express those parameters and will be filled by the command-line
-+ * parser.
-+ */
- struct drm_cmdline_mode {
-+      /**
-+       * @specified:
-+       *
-+       * Has a mode been read from the command-line?
-+       */
-       bool specified;
-+
-+      /**
-+       * @refresh_specified:
-+       *
-+       * Did the mode have a preferred refresh rate?
-+       */
-       bool refresh_specified;
-+
-+      /**
-+       * @bpp_specified:
-+       *
-+       * Did the mode have a preferred BPP?
-+       */
-       bool bpp_specified;
--      int xres, yres;
-+
-+      /**
-+       * @xres:
-+       *
-+       * Active resolution on the X axis, in pixels.
-+       */
-+      int xres;
-+
-+      /**
-+       * @yres:
-+       *
-+       * Active resolution on the Y axis, in pixels.
-+       */
-+      int yres;
-+
-+      /**
-+       * @bpp:
-+       *
-+       * Bits per pixels for the mode.
-+       */
-       int bpp;
-+
-+      /**
-+       * @refresh:
-+       *
-+       * Refresh rate, in Hertz.
-+       */
-       int refresh;
-+
-+      /**
-+       * @rb:
-+       *
-+       * Do we need to use reduced blanking?
-+       */
-       bool rb;
-+
-+      /**
-+       * @interlace:
-+       *
-+       * The mode is interlaced.
-+       */
-       bool interlace;
-+
-+      /**
-+       * @cvt:
-+       *
-+       * The timings will be calculated using the VESA Coordinated
-+       * Video Timings instead of looking up the mode from a table.
-+       */
-       bool cvt;
-+
-+      /**
-+       * @margins:
-+       *
-+       * Add margins to the mode calculation (1.8% of xres rounded
-+       * down to 8 pixels and 1.8% of yres).
-+       */
-       bool margins;
-+
-+      /**
-+       * @force:
-+       *
-+       * Ignore the hotplug state of the connector, and force its
-+       * state to one of the DRM_FORCE_* values.
-+       */
-       enum drm_connector_force force;
- };
-