brcm2708: rename target to bcm27xx

[openwrt/openwrt.git] / target / linux / brcm2708 / patches-4.19 / 950-0772-arm-dts-Correct-Pi-4B-LED-values.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0772-arm-dts-Correct-Pi-4B-LED-values.patch b/target/linux/brcm2708/patches-4.19/950-0772-arm-dts-Correct-Pi-4B-LED-values.patch
deleted file mode 100644 (file)
index 4f2e46b..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0772-arm-dts-Correct-Pi-4B-LED-values.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From ea1e25b4c0a055b31a0217ffbfd6972c28643912 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 22 Nov 2019 15:08:25 +0000
-Subject: [PATCH] arm/dts: Correct Pi 4B LED values
-
-The initial PHY LED settings are wrong Pi 4B (the correct values got
-dropped somewhere along the way). The PHY declaration should arguably
-go in a separate file included by bcm2711-rpi-4-b.dts, but we can
-fix that as we switch over to using more of the upstream BCM2711
-support in 5.4 and later.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/bcm2838.dtsi    | 2 +-
- arch/arm/boot/dts/overlays/README | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2838.dtsi
-+++ b/arch/arm/boot/dts/bcm2838.dtsi
-@@ -380,7 +380,7 @@
-                                       /* No interrupts - use PHY_POLL */
-                                       max-speed = <1000>;
-                                       reg = <0x1>;
--                                      led-modes = <0x02 0x02>;
-+                                      led-modes = <0x00 0x08>; /* link/activity link */
-                               };
-                       };
-               };
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -128,7 +128,7 @@ Params:
-                                 8=Link                   9=Activity
- 
-         eth_led1                Set mode of LED1 (usually green) (Pi3B+ default
--                                "6", Pi4 default "0"). See eth_led0 for legal
-+                                "6", Pi4 default "8"). See eth_led0 for legal
-                                 values.
- 
-         eth_max_speed           Set the maximum speed a link is allowed