+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006-2015 OpenWrt.org
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-
-detect_by_vlanports() {
- local vlan0ports="$(nvram get vlan0ports)"
- local vlan1ports="$(nvram get vlan1ports)"
- local vlan2ports="$(nvram get vlan2ports)"
- local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
-
- if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
- [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
- [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
- then
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
-
- elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
- [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
- [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ];
- then
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0"
-
- elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
- [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
- [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
- then
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
-
- elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
- [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
- [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ];
- then
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
-
- else
- logger -t "01_detect" "Unable to determine network configuration"
- ucidef_set_interface_lan "eth0"
- fi
-}
-
-detect_by_boardnum() {
- local boardnum="$1"
-
- case "$boardnum" in
- # WAP54G, Sitecom WL-105b
- "2" | \
- "1024")
- ucidef_set_interface_lan "eth0"
- ;;
-
- # Generic detection fallback
- *)
- detect_by_vlanports
- ;;
- esac
-}
-
-detect_by_boardtype() {
- local boardtype="$1"
- local boardnum="$2"
-
- case "$boardtype" in
- "bcm94710r4")
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ;;
-
- "0x0467")
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
- ;;
-
- "0x042f" | \
- "0x0472")
- # WL-500gP
- if [ "$boardnum" = "45" ]; then
- ucidef_add_switch "switch0" \
- "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
-
- # Generic BCM94704
- else
- ucidef_set_interface_wan "eth1"
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
-
- # MAC addresses on 4704 tend to be screwed up. Add a workaround here
- local mac="$(nvram get et0macaddr)"
- local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
- pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
- pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
-
- case "$mac" in
- $pat)
- ucidef_set_interface_macaddr "lan" "$mac"
- ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
- ;;
- esac
- fi
- ;;
-
- # Buffalo WBR-B11 and Buffalo WBR-G54
- "bcm94710ap")
- ucidef_set_interface_wan "eth1"
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
- ;;
-
- *)
- detect_by_boardnum "$boardnum"
- ;;
- esac
-}
-
-detect_by_model() {
- local model="$1"
- local boardtype="$2"
- local boardnum="$3"
-
- # Netgear WGT634U exception
- if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
- return
- fi
-
- case "$model" in
- "Asus WLHDD" | \
- "Asus WL300G")
- ucidef_set_interface_lan "eth1"
- ;;
-
- "Asus WL330GE")
- ucidef_add_switch "switch0" "4:lan" "5t@eth0"
- ;;
-
- "Asus WL500G" | \
- "Microsoft MN-700")
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ;;
-
- "Asus RT-N12"* | \
- "Asus WL500GP V2" | \
- "Buffalo WHR-G125" | \
- "D-Link DIR-330" | \
- "Motorola WR850G" | \
- "Siemens SE505 V2")
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
- ;;
-
- "Asus WL700")
- ucidef_add_switch "switch0" \
- "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
- ;;
-
- "Asus WL500W" | \
- "Dell TrueMobile 2300")
- ucidef_set_interface_wan "eth1"
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
- ;;
-
- "Asus RT-N16"* | \
- "Linksys E3000 V1")
- ucidef_add_switch "switch0" \
- "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
- ;;
-
- *)
- detect_by_boardtype "$boardtype" "$boardnum"
- ;;
- esac
-}
-
-
-model="$(board_name)"
-boardtype="$(nvram get boardtype)"
-boardnum="$(nvram get boardnum)"
-
-board_config_update
-
-ucidef_set_board_id "$boardtype${boardnum:+:$boardnum}"
-ucidef_set_model_name "$model"
-
-detect_by_model "$model" "$boardtype" "$boardnum"
-
-board_config_flush
projects / openwrt / openwrt.git / blobdiff