brcm47xx: add kernel 4.14 support

[openwrt/openwrt.git] / target / linux / brcm47xx / patches-4.14 / 610-pci_ide_fix.patch

diff --git a/target/linux/brcm47xx/patches-4.14/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-4.14/610-pci_ide_fix.patch
new file mode 100644 (file)
index 0000000..ccae6a5
--- /dev/null
+++ b/target/linux/brcm47xx/patches-4.14/610-pci_ide_fix.patch
@@ -0,0 +1,41 @@
+From: b.sander
+Subject: [PATCH] pci: IDE fix
+
+These are standard probing messages when using pdc202xx_old:
+pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
+PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
+PCI: Fixing up device 0000:00:01.0
+0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
+0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
+pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
+
+With the default MAX_HWIFS value after above we get:
+    ide2: BM-DMA at 0x0400-0x0407
+    ide3: BM-DMA at 0x0408-0x040f
+Probing IDE interface ide2...
+hde: CF500, CFA DISK drive
+
+As you can see it's ide2 + ide3 and hde.
+
+With this patch applied we get:
+    ide0: BM-DMA at 0x0400-0x0407
+    ide1: BM-DMA at 0x0408-0x040f
+Probing IDE interface ide0...
+hda: CF500, CFA DISK drive
+
+This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
+---
+--- a/include/linux/ide.h
++++ b/include/linux/ide.h
+@@ -241,7 +241,11 @@ static inline void ide_std_init_ports(st
+       hw->io_ports.ctl_addr = ctl_addr;
+ }
+ 
++#if defined CONFIG_BCM47XX
++# define MAX_HWIFS    2
++#else
+ #define MAX_HWIFS     10
++#endif
+ 
+ /*
+  * Now for the data we need to maintain per-drive:  ide_drive_t