brcm47xx: remove linux 4.9 support

[openwrt/openwrt.git] / target / linux / brcm47xx / patches-4.9 / 032-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch

diff --git a/target/linux/brcm47xx/patches-4.9/032-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch b/target/linux/brcm47xx/patches-4.9/032-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch
deleted file mode 100644 (file)
index d14719b..0000000
--- a/target/linux/brcm47xx/patches-4.9/032-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 272641206100e89656038180da12eff4f03d79d1 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dan.haab@luxul.com>
-Date: Tue, 27 Mar 2018 11:24:34 -0600
-Subject: [PATCH] MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
-
-Some Luxul devices use PCIe connected GPIO LEDs that are not available
-until the PCI subsytem and its drivers load. Using the same array for
-these LEDs would block registering any LEDs until all GPIOs become
-available. This may be undesired behavior as some LEDs should be
-available as early as possible (e.g. system status LED). This patch will
-allow registering available LEDs while deferring these PCIe GPIO
-connected 'extra' LEDs until they become available.
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/18952/
-Signed-off-by: James Hogan <jhogan@kernel.org>
----
- arch/mips/bcm47xx/leds.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -408,6 +408,12 @@ bcm47xx_leds_luxul_xap_1500_v1[] __initc
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
-+      BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+      BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
-       BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-       BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
-@@ -434,6 +440,11 @@ bcm47xx_leds_luxul_xwr_1750_v1[] __initc
-       BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
- 
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
-+      BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
- /* Microsoft */
- 
- static const struct gpio_led
-@@ -527,6 +538,12 @@ static struct gpio_led_platform_data bcm
-       bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds);             \
- } while (0)
- 
-+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {};
-+#define bcm47xx_set_pdata_extra(dev_leds) do {                                \
-+      bcm47xx_leds_pdata_extra.leds = dev_leds;                       \
-+      bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds);       \
-+} while (0)
-+
- void __init bcm47xx_leds_register(void)
- {
-       enum bcm47xx_board board = bcm47xx_board_get();
-@@ -704,6 +721,7 @@ void __init bcm47xx_leds_register(void)
-               break;
-       case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
-               bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
-+              bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
-               break;
-       case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
-               bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
-@@ -716,6 +734,7 @@ void __init bcm47xx_leds_register(void)
-               break;
-       case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
-               bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
-+              bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
-               break;
- 
-       case BCM47XX_BOARD_MICROSOFT_MN700:
-@@ -759,4 +778,6 @@ void __init bcm47xx_leds_register(void)
-       }
- 
-       gpio_led_register_device(-1, &bcm47xx_leds_pdata);
-+      if (bcm47xx_leds_pdata_extra.num_leds)
-+              gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
- }