brcm63xx: add kernel 3.18 support

[openwrt/openwrt.git] / target / linux / brcm63xx / patches-3.18 / 526-board_CT6373-1.patch

diff --git a/target/linux/brcm63xx/patches-3.18/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.18/526-board_CT6373-1.patch
new file mode 100644 (file)
index 0000000..5c823fe
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/526-board_CT6373-1.patch
@@ -0,0 +1,156 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -43,6 +43,12 @@
+ #define NB4_SPI_GPIO_CLK      6
+ #define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
+ 
++#define CT6373_PID_OFFSET             0xff80
++#define CT6373_74X164_GPIO_BASE       64
++#define CT6373_SPI_GPIO_MOSI  7
++#define CT6373_SPI_GPIO_CLK           6
++#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
++
+ /*
+  * known 3368 boards
+  */
+@@ -2035,6 +2041,124 @@ static struct board_info __initdata boar
+       .num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
+ 
++
++struct spi_gpio_platform_data ct6373_spi_gpio_data = {
++      .sck            = CT6373_SPI_GPIO_CLK,
++      .mosi           = CT6373_SPI_GPIO_MOSI,
++      .miso           = SPI_GPIO_NO_MISO,
++      .num_chipselect = 1,
++};
++
++static struct platform_device ct6373_spi_gpio = {
++      .name = "spi_gpio",
++      .id   = 1,
++      .dev = {
++              .platform_data = &ct6373_spi_gpio_data,
++      },
++};
++
++static struct platform_device * __initdata ct6373_devices[] = {
++      &ct6373_spi_gpio,
++};
++
++#if 0 /* FIXME: 3.14 dropped non-DT support */
++const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
++      .base = CT6373_74X164_GPIO_BASE
++};
++#endif
++
++static struct spi_board_info ct6373_spi_devices[] = {
++#if 0 /* FIXME: 3.14 dropped non-DT support */
++      {
++              .modalias = "74x164",
++              .max_speed_hz = 781000,
++              .bus_num = 1,
++              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++              .mode = SPI_MODE_0,
++              .platform_data = &ct6373_74x164_platform_data
++      }
++#endif
++};
++
++static struct board_info __initdata board_ct6373_1 = {
++      .name                           = "CT6373-1",
++      .expected_cpu_id        = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "CT6373-1:green:power",
++                      .gpio           = 0,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "CT6373-1:green:usb",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:wlan",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:adsl",
++                      .gpio           = CT6373_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:line",
++                      .gpio           = CT6373_74HC64_GPIO(1),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:fxs1",
++                      .gpio           = CT6373_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:fxs2",
++                      .gpio           = CT6373_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 35,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++
++      .devs = ct6373_devices,
++      .num_devs = ARRAY_SIZE(ct6373_devices),
++      .spis = ct6373_spi_devices,
++      .num_spis = ARRAY_SIZE(ct6373_spi_devices),
++};
++
+ static struct board_info __initdata board_HW553 = {
+       .name                           = "HW553",
+       .expected_cpu_id                = 0x6358,
+@@ -2376,6 +2500,7 @@ static const struct board_info __initcon
+       &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
++      &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
+ #endif
+@@ -2422,6 +2547,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
+       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
+       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++      { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "huawei,hg553", .data = &board_HW553, },