change the way ./files* and the generic kernel files are applied. ./files now applies...

[openwrt/openwrt.git] / target / linux / generic-2.6 / files-2.6.25 / drivers / net / phy / adm6996.h

diff --git a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.h
deleted file mode 100644 (file)
index e074901..0000000
--- a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * ADM6996 switch driver
- *
- * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of the GNU General Public License v2 as published by the
- * Free Software Foundation
- */
-#ifndef __ADM6996_H
-#define __ADM6996_H
-
-#define ADM_PHY_PORTS  5
-#define ADM_CPU_PORT   5
-#define ADM_WAN_PORT   0 /* FIXME: dynamic ? */
-
-enum admreg {
-       ADM_EEPROM_BASE         = 0x0,
-               ADM_P0_CFG              = ADM_EEPROM_BASE + 1,
-               ADM_P1_CFG              = ADM_EEPROM_BASE + 3,
-               ADM_P2_CFG              = ADM_EEPROM_BASE + 5,
-               ADM_P3_CFG              = ADM_EEPROM_BASE + 7,
-               ADM_P4_CFG              = ADM_EEPROM_BASE + 8,
-               ADM_P5_CFG              = ADM_EEPROM_BASE + 9,
-       ADM_EEPROM_EXT_BASE     = 0x40,
-       ADM_COUNTER_BASE        = 0xa0,
-               ADM_SIG0                = ADM_COUNTER_BASE + 0,
-               ADM_SIG1                = ADM_COUNTER_BASE + 1,
-       ADM_PHY_BASE            = 0x200,
-#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
-};
-
-/* Chip identification patterns */
-#define        ADM_SIG0_MASK   0xfff0
-#define ADM_SIG0_VAL   0x1020
-#define ADM_SIG1_MASK  0xffff
-#define ADM_SIG1_VAL   0x0007
-
-enum {
-       ADM_PHYCFG_COLTST     = (1 << 7),       /* Enable collision test */
-       ADM_PHYCFG_DPLX       = (1 << 8),       /* Enable full duplex */
-       ADM_PHYCFG_ANEN_RST   = (1 << 9),       /* Restart auto negotiation (self clear) */
-       ADM_PHYCFG_ISO        = (1 << 10),      /* Isolate PHY */
-       ADM_PHYCFG_PDN        = (1 << 11),      /* Power down PHY */
-       ADM_PHYCFG_ANEN       = (1 << 12),      /* Enable auto negotiation */
-       ADM_PHYCFG_SPEED_100  = (1 << 13),      /* Enable 100 Mbit/s */
-       ADM_PHYCFG_LPBK       = (1 << 14),      /* Enable loopback operation */
-       ADM_PHYCFG_RST        = (1 << 15),      /* Reset the port (self clear) */
-       ADM_PHYCFG_INIT = (
-               ADM_PHYCFG_RST |
-               ADM_PHYCFG_SPEED_100 |
-               ADM_PHYCFG_ANEN |
-               ADM_PHYCFG_ANEN_RST
-       )
-};
-
-enum {
-       ADM_PORTCFG_FC        = (1 << 0),       /* Enable 802.x flow control */
-       ADM_PORTCFG_AN        = (1 << 1),       /* Enable auto-negotiation */
-       ADM_PORTCFG_SPEED_100 = (1 << 2),       /* Enable 100 Mbit/s */
-       ADM_PORTCFG_DPLX      = (1 << 3),       /* Enable full duplex */
-       ADM_PORTCFG_OT        = (1 << 4),       /* Output tagged packets */
-       ADM_PORTCFG_PD        = (1 << 5),       /* Port disable */
-       ADM_PORTCFG_TV_PRIO   = (1 << 6),       /* 0 = VLAN based priority
-                                                * 1 = TOS based priority */
-       ADM_PORTCFG_PPE       = (1 << 7),       /* Port based priority enable */
-       ADM_PORTCFG_PP_S      = (1 << 8),       /* Port based priority, 2 bits */
-       ADM_PORTCFG_PVID_BASE = (1 << 10),      /* Primary VLAN id, 4 bits */
-       ADM_PORTCFG_FSE       = (1 << 14),      /* Fx select enable */
-       ADM_PORTCFG_CAM       = (1 << 15),      /* Crossover Auto MDIX */
-
-       ADM_PORTCFG_INIT = (
-               ADM_PORTCFG_FC |
-               ADM_PORTCFG_AN |
-               ADM_PORTCFG_SPEED_100 |
-               ADM_PORTCFG_DPLX |
-               ADM_PORTCFG_CAM
-       ),
-       ADM_PORTCFG_CPU = (
-               ADM_PORTCFG_FC |
-               ADM_PORTCFG_SPEED_100 |
-               ADM_PORTCFG_OT |
-               ADM_PORTCFG_DPLX
-       ),
-};
-
-#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8)
-#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
-
-static const u8 adm_portcfg[] = {
-       [0] = ADM_P0_CFG,
-       [1] = ADM_P1_CFG,
-       [2] = ADM_P2_CFG,
-       [3] = ADM_P3_CFG,
-       [4] = ADM_P4_CFG,
-       [5] = ADM_P5_CFG,
-};
-
-/*
- * Split the register address in phy id and register
- * it will get combined again by the mdio bus op
- */
-#define PHYADDR(_reg)  ((_reg >> 5) & 0xff), (_reg & 0x1f)
-
-#endif