+++ /dev/null
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
-
- If unsure, say N
-
-+config SSB_SFLASH
-+ bool "SSB serial flash support"
-+ depends on SSB_DRIVER_MIPS
-+ default y
-+
- # Assumption: We are on embedded, if we compile the MIPS core.
- config SSB_EMBEDDED
- bool
-- depends on SSB_DRIVER_MIPS
-+ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
- default y
-
- config SSB_DRIVER_EXTIF
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
- # built-in drivers
- ssb-y += driver_chipcommon.o
- ssb-y += driver_chipcommon_pmu.o
-+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip
-
- if (cc->dev->id.revision >= 11)
- cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
-- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
-+ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
-
- if (cc->dev->id.revision >= 20) {
- chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
---- a/drivers/ssb/driver_chipcommon_pmu.c
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
- return;
- }
-
-- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-- (crystalfreq / 1000), (crystalfreq % 1000));
-+ ssb_info("Programming PLL to %u.%03u MHz\n",
-+ crystalfreq / 1000, crystalfreq % 1000);
-
- /* First turn the PLL off. */
- switch (bus->chip_id) {
-@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
- }
- tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
- if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+ ssb_emerg("Failed to turn the PLL off!\n");
-
- /* Set PDIV in PLL control 0. */
- pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
-@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
- return;
- }
-
-- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-- (crystalfreq / 1000), (crystalfreq % 1000));
-+ ssb_info("Programming PLL to %u.%03u MHz\n",
-+ crystalfreq / 1000, crystalfreq % 1000);
-
- /* First turn the PLL off. */
- switch (bus->chip_id) {
-@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
- }
- tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
- if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+ ssb_emerg("Failed to turn the PLL off!\n");
-
- /* Set p1div and p2div. */
- pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
-@@ -349,9 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_
- case 43222:
- break;
- default:
-- ssb_printk(KERN_ERR PFX
-- "ERROR: PLL init unknown for device %04X\n",
-- bus->chip_id);
-+ ssb_err("ERROR: PLL init unknown for device %04X\n",
-+ bus->chip_id);
- }
- }
-
-@@ -472,9 +471,8 @@ static void ssb_pmu_resources_init(struc
- max_msk = 0xFFFFF;
- break;
- default:
-- ssb_printk(KERN_ERR PFX
-- "ERROR: PMU resource config unknown for device %04X\n",
-- bus->chip_id);
-+ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
-+ bus->chip_id);
- }
-
- if (updown_tab) {
-@@ -526,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
- pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
- cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
-
-- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
-- cc->pmu.rev, pmucap);
-+ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
-+ cc->pmu.rev, pmucap);
-
- if (cc->pmu.rev == 1)
- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
-@@ -638,9 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chi
- case 0x5354:
- ssb_pmu_get_alp_clock_clk0(cc);
- default:
-- ssb_printk(KERN_ERR PFX
-- "ERROR: PMU alp clock unknown for device %04X\n",
-- bus->chip_id);
-+ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
-+ bus->chip_id);
- return 0;
- }
- }
-@@ -654,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
- /* 5354 chip uses a non programmable PLL of frequency 240MHz */
- return 240000000;
- default:
-- ssb_printk(KERN_ERR PFX
-- "ERROR: PMU cpu clock unknown for device %04X\n",
-- bus->chip_id);
-+ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
-+ bus->chip_id);
- return 0;
- }
- }
-@@ -669,9 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_
- case 0x5354:
- return 120000000;
- default:
-- ssb_printk(KERN_ERR PFX
-- "ERROR: PMU controlclock unknown for device %04X\n",
-- bus->chip_id);
-+ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
-+ bus->chip_id);
- return 0;
- }
- }
-@@ -692,8 +687,23 @@ void ssb_pmu_spuravoid_pllupdate(struct
- pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
- break;
- case 43222:
-- /* TODO: BCM43222 requires updating PLLs too */
-- return;
-+ if (spuravoid == 1) {
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
-+ } else {
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
-+ }
-+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
-+ break;
- default:
- ssb_printk(KERN_ERR PFX
- "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
---- /dev/null
-+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,164 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * ChipCommon serial flash interface
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+
-+#include "ssb_private.h"
-+
-+static struct resource ssb_sflash_resource = {
-+ .name = "ssb_sflash",
-+ .start = SSB_FLASH2,
-+ .end = 0,
-+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
-+};
-+
-+struct platform_device ssb_sflash_dev = {
-+ .name = "ssb_sflash",
-+ .resource = &ssb_sflash_resource,
-+ .num_resources = 1,
-+};
-+
-+struct ssb_sflash_tbl_e {
-+ char *name;
-+ u32 id;
-+ u32 blocksize;
-+ u16 numblocks;
-+};
-+
-+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
-+ { "M25P20", 0x11, 0x10000, 4, },
-+ { "M25P40", 0x12, 0x10000, 8, },
-+
-+ { "M25P16", 0x14, 0x10000, 32, },
-+ { "M25P32", 0x15, 0x10000, 64, },
-+ { "M25P64", 0x16, 0x10000, 128, },
-+ { "M25FL128", 0x17, 0x10000, 256, },
-+ { 0 },
-+};
-+
-+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
-+ { "SST25WF512", 1, 0x1000, 16, },
-+ { "SST25VF512", 0x48, 0x1000, 16, },
-+ { "SST25WF010", 2, 0x1000, 32, },
-+ { "SST25VF010", 0x49, 0x1000, 32, },
-+ { "SST25WF020", 3, 0x1000, 64, },
-+ { "SST25VF020", 0x43, 0x1000, 64, },
-+ { "SST25WF040", 4, 0x1000, 128, },
-+ { "SST25VF040", 0x44, 0x1000, 128, },
-+ { "SST25VF040B", 0x8d, 0x1000, 128, },
-+ { "SST25WF080", 5, 0x1000, 256, },
-+ { "SST25VF080B", 0x8e, 0x1000, 256, },
-+ { "SST25VF016", 0x41, 0x1000, 512, },
-+ { "SST25VF032", 0x4a, 0x1000, 1024, },
-+ { "SST25VF064", 0x4b, 0x1000, 2048, },
-+ { 0 },
-+};
-+
-+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
-+ { "AT45DB011", 0xc, 256, 512, },
-+ { "AT45DB021", 0x14, 256, 1024, },
-+ { "AT45DB041", 0x1c, 256, 2048, },
-+ { "AT45DB081", 0x24, 256, 4096, },
-+ { "AT45DB161", 0x2c, 512, 4096, },
-+ { "AT45DB321", 0x34, 512, 8192, },
-+ { "AT45DB642", 0x3c, 1024, 8192, },
-+ { 0 },
-+};
-+
-+static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
-+{
-+ int i;
-+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
-+ SSB_CHIPCO_FLASHCTL_START | opcode);
-+ for (i = 0; i < 1000; i++) {
-+ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
-+ SSB_CHIPCO_FLASHCTL_BUSY))
-+ return;
-+ cpu_relax();
-+ }
-+ pr_err("SFLASH control command failed (timeout)!\n");
-+}
-+
-+/* Initialize serial flash access */
-+int ssb_sflash_init(struct ssb_chipcommon *cc)
-+{
-+ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
-+ const struct ssb_sflash_tbl_e *e;
-+ u32 id, id2;
-+
-+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+ case SSB_CHIPCO_FLASHT_STSER:
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
-+
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+
-+ switch (id) {
-+ case 0xbf:
-+ for (e = ssb_sflash_sst_tbl; e->name; e++) {
-+ if (e->id == id2)
-+ break;
-+ }
-+ break;
-+ case 0x13:
-+ return -ENOTSUPP;
-+ default:
-+ for (e = ssb_sflash_st_tbl; e->name; e++) {
-+ if (e->id == id)
-+ break;
-+ }
-+ break;
-+ }
-+ if (!e->name) {
-+ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
-+ id, id2);
-+ return -ENOTSUPP;
-+ }
-+
-+ break;
-+ case SSB_CHIPCO_FLASHT_ATSER:
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
-+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
-+
-+ for (e = ssb_sflash_at_tbl; e->name; e++) {
-+ if (e->id == id)
-+ break;
-+ }
-+ if (!e->name) {
-+ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
-+ id);
-+ return -ENOTSUPP;
-+ }
-+
-+ break;
-+ default:
-+ pr_err("Unsupported flash type\n");
-+ return -ENOTSUPP;
-+ }
-+
-+ sflash->window = SSB_FLASH2;
-+ sflash->blocksize = e->blocksize;
-+ sflash->numblocks = e->numblocks;
-+ sflash->size = sflash->blocksize * sflash->numblocks;
-+ sflash->present = true;
-+
-+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
-+ e->name, sflash->size / 1024, e->blocksize, e->numblocks);
-+
-+ /* Prepare platform device, but don't register it yet. It's too early,
-+ * malloc (required by device_private_init) is not available yet. */
-+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
-+ sflash->size;
-+ ssb_sflash_dev.dev.platform_data = sflash;
-+
-+ return 0;
-+}
---- a/drivers/ssb/driver_gpio.c
-+++ b/drivers/ssb/driver_gpio.c
-@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
- ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
- }
-
-+static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
-+
-+ if (bus->bustype == SSB_BUSTYPE_SSB)
-+ return ssb_mips_irq(bus->chipco.dev) + 2;
-+ else
-+ return -EINVAL;
-+}
-+
- static int ssb_gpio_chipco_init(struct ssb_bus *bus)
- {
- struct gpio_chip *chip = &bus->gpio;
-@@ -86,6 +96,7 @@ static int ssb_gpio_chipco_init(struct s
- chip->set = ssb_gpio_chipco_set_value;
- chip->direction_input = ssb_gpio_chipco_direction_input;
- chip->direction_output = ssb_gpio_chipco_direction_output;
-+ chip->to_irq = ssb_gpio_chipco_to_irq;
- chip->ngpio = 16;
- /* There is just one SoC in one device and its GPIO addresses should be
- * deterministic to address them more easily. The other buses could get
-@@ -134,6 +145,16 @@ static int ssb_gpio_extif_direction_outp
- return 0;
- }
-
-+static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
-+
-+ if (bus->bustype == SSB_BUSTYPE_SSB)
-+ return ssb_mips_irq(bus->extif.dev) + 2;
-+ else
-+ return -EINVAL;
-+}
-+
- static int ssb_gpio_extif_init(struct ssb_bus *bus)
- {
- struct gpio_chip *chip = &bus->gpio;
-@@ -144,6 +165,7 @@ static int ssb_gpio_extif_init(struct ss
- chip->set = ssb_gpio_extif_set_value;
- chip->direction_input = ssb_gpio_extif_direction_input;
- chip->direction_output = ssb_gpio_extif_direction_output;
-+ chip->to_irq = ssb_gpio_extif_to_irq;
- chip->ngpio = 5;
- /* There is just one SoC in one device and its GPIO addresses should be
- * deterministic to address them more easily. The other buses could get
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -10,6 +10,7 @@
-
- #include <linux/ssb/ssb.h>
-
-+#include <linux/mtd/physmap.h>
- #include <linux/serial.h>
- #include <linux/serial_core.h>
- #include <linux/serial_reg.h>
-@@ -17,6 +18,25 @@
-
- #include "ssb_private.h"
-
-+static const char *part_probes[] = { "bcm47xxpart", NULL };
-+
-+static struct physmap_flash_data ssb_pflash_data = {
-+ .part_probe_types = part_probes,
-+};
-+
-+static struct resource ssb_pflash_resource = {
-+ .name = "ssb_pflash",
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+struct platform_device ssb_pflash_dev = {
-+ .name = "physmap-flash",
-+ .dev = {
-+ .platform_data = &ssb_pflash_data,
-+ },
-+ .resource = &ssb_pflash_resource,
-+ .num_resources = 1,
-+};
-
- static inline u32 mips_read32(struct ssb_mipscore *mcore,
- u16 offset)
-@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
- irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
- ssb_write32(mdev, SSB_IPSFLAG, irqflag);
- }
-- ssb_dprintk(KERN_INFO PFX
-- "set_irq: core 0x%04x, irq %d => %d\n",
-- dev->id.coreid, oldirq+2, irq+2);
-+ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
-+ dev->id.coreid, oldirq+2, irq+2);
- }
-
- static void print_irq(struct ssb_device *dev, unsigned int irq)
- {
-- int i;
- static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
-- ssb_dprintk(KERN_INFO PFX
-- "core 0x%04x, irq :", dev->id.coreid);
-- for (i = 0; i <= 6; i++) {
-- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
-- }
-- ssb_dprintk("\n");
-+ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
-+ dev->id.coreid,
-+ irq_name[0], irq == 0 ? "*" : " ",
-+ irq_name[1], irq == 1 ? "*" : " ",
-+ irq_name[2], irq == 2 ? "*" : " ",
-+ irq_name[3], irq == 3 ? "*" : " ",
-+ irq_name[4], irq == 4 ? "*" : " ",
-+ irq_name[5], irq == 5 ? "*" : " ",
-+ irq_name[6], irq == 6 ? "*" : " ");
- }
-
- static void dump_irq(struct ssb_bus *bus)
-@@ -189,34 +210,43 @@ static void ssb_mips_serial_init(struct
- static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
- {
- struct ssb_bus *bus = mcore->dev->bus;
-+ struct ssb_pflash *pflash = &mcore->pflash;
-
- /* When there is no chipcommon on the bus there is 4MB flash */
- if (!ssb_chipco_available(&bus->chipco)) {
-- mcore->pflash.present = true;
-- mcore->pflash.buswidth = 2;
-- mcore->pflash.window = SSB_FLASH1;
-- mcore->pflash.window_size = SSB_FLASH1_SZ;
-- return;
-+ pflash->present = true;
-+ pflash->buswidth = 2;
-+ pflash->window = SSB_FLASH1;
-+ pflash->window_size = SSB_FLASH1_SZ;
-+ goto ssb_pflash;
- }
-
- /* There is ChipCommon, so use it to read info about flash */
- switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
- case SSB_CHIPCO_FLASHT_STSER:
- case SSB_CHIPCO_FLASHT_ATSER:
-- pr_err("Serial flash not supported\n");
-+ pr_debug("Found serial flash\n");
-+ ssb_sflash_init(&bus->chipco);
- break;
- case SSB_CHIPCO_FLASHT_PARA:
- pr_debug("Found parallel flash\n");
-- mcore->pflash.present = true;
-- mcore->pflash.window = SSB_FLASH2;
-- mcore->pflash.window_size = SSB_FLASH2_SZ;
-+ pflash->present = true;
-+ pflash->window = SSB_FLASH2;
-+ pflash->window_size = SSB_FLASH2_SZ;
- if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
- & SSB_CHIPCO_CFG_DS16) == 0)
-- mcore->pflash.buswidth = 1;
-+ pflash->buswidth = 1;
- else
-- mcore->pflash.buswidth = 2;
-+ pflash->buswidth = 2;
- break;
- }
-+
-+ssb_pflash:
-+ if (pflash->present) {
-+ ssb_pflash_data.width = pflash->buswidth;
-+ ssb_pflash_resource.start = pflash->window;
-+ ssb_pflash_resource.end = pflash->window + pflash->window_size;
-+ }
- }
-
- u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
-@@ -257,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
- if (!mcore->dev)
- return; /* We don't have a MIPS core */
-
-- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
-+ ssb_dbg("Initializing MIPS core...\n");
-
- bus = mcore->dev->bus;
- hz = ssb_clockspeed(bus);
-@@ -305,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
- break;
- }
- }
-- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
-+ ssb_dbg("after irq reconfiguration\n");
- dump_irq(bus);
-
- ssb_mips_serial_init(mcore);
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
- return -ENODEV;
- }
-
-- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
-- pci_name(d));
-+ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
-
- /* Fix up interrupt lines */
- d->irq = ssb_mips_irq(extpci_core->dev) + 2;
-@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
- return;
-
-- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
-+ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
-
- /* Enable PCI bridge bus mastering and memory space */
- pci_set_master(dev);
- if (pcibios_enable_device(dev, ~0) < 0) {
-- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
-+ ssb_err("PCI: SSB bridge enable failed\n");
- return;
- }
-
-@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
-
- /* Make sure our latency is high enough to handle the devices behind us */
- lat = 168;
-- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-- pci_name(dev), lat);
-+ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
-+ pci_name(dev), lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
-@@ -323,7 +322,7 @@ static void ssb_pcicore_init_hostmode(st
- return;
- extpci_core = pc;
-
-- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
-+ ssb_dbg("PCIcore in host mode found\n");
- /* Reset devices on the external PCI bus */
- val = SSB_PCICORE_CTL_RST_OE;
- val |= SSB_PCICORE_CTL_CLK_OE;
-@@ -338,7 +337,7 @@ static void ssb_pcicore_init_hostmode(st
- udelay(1); /* Assertion time demanded by the PCI standard */
-
- if (pc->dev->bus->has_cardbus_slot) {
-- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
-+ ssb_dbg("CardBus slot detected\n");
- pc->cardbusmode = 1;
- /* GPIO 1 resets the bridge */
- ssb_gpio_out(pc->dev->bus, 1, 1);
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -57,9 +57,8 @@ int ssb_watchdog_register(struct ssb_bus
- bus->busnumber, &wdt,
- sizeof(wdt));
- if (IS_ERR(pdev)) {
-- ssb_dprintk(KERN_INFO PFX
-- "can not register watchdog device, err: %li\n",
-- PTR_ERR(pdev));
-+ ssb_dbg("can not register watchdog device, err: %li\n",
-+ PTR_ERR(pdev));
- return PTR_ERR(pdev);
- }
-
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -275,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
-
- err = sdrv->probe(sdev, &sdev->id);
- if (err) {
-- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
-- dev_name(sdev->dev));
-+ ssb_err("Failed to thaw device %s\n",
-+ dev_name(sdev->dev));
- result = err;
- }
- ssb_device_put(sdev);
-@@ -447,10 +447,9 @@ void ssb_bus_unregister(struct ssb_bus *
-
- err = ssb_gpio_unregister(bus);
- if (err == -EBUSY)
-- ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n");
-+ ssb_dbg("Some GPIOs are still in use\n");
- else if (err)
-- ssb_dprintk(KERN_ERR PFX
-- "Can not unregister GPIO driver: %i\n", err);
-+ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
-
- ssb_buses_lock();
- ssb_devices_unregister(bus);
-@@ -497,8 +496,7 @@ static int ssb_devices_register(struct s
-
- devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
- if (!devwrap) {
-- ssb_printk(KERN_ERR PFX
-- "Could not allocate device\n");
-+ ssb_err("Could not allocate device\n");
- err = -ENOMEM;
- goto error;
- }
-@@ -537,9 +535,7 @@ static int ssb_devices_register(struct s
- sdev->dev = dev;
- err = device_register(dev);
- if (err) {
-- ssb_printk(KERN_ERR PFX
-- "Could not register %s\n",
-- dev_name(dev));
-+ ssb_err("Could not register %s\n", dev_name(dev));
- /* Set dev to NULL to not unregister
- * dev on error unwinding. */
- sdev->dev = NULL;
-@@ -549,6 +545,22 @@ static int ssb_devices_register(struct s
- dev_idx++;
- }
-
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+ if (bus->mipscore.pflash.present) {
-+ err = platform_device_register(&ssb_pflash_dev);
-+ if (err)
-+ pr_err("Error registering parallel flash\n");
-+ }
-+#endif
-+
-+#ifdef CONFIG_SSB_SFLASH
-+ if (bus->mipscore.sflash.present) {
-+ err = platform_device_register(&ssb_sflash_dev);
-+ if (err)
-+ pr_err("Error registering serial flash\n");
-+ }
-+#endif
-+
- return 0;
- error:
- /* Unwind the already registered devices. */
-@@ -817,10 +829,9 @@ static int ssb_bus_register(struct ssb_b
- ssb_mipscore_init(&bus->mipscore);
- err = ssb_gpio_init(bus);
- if (err == -ENOTSUPP)
-- ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
-+ ssb_dbg("GPIO driver not activated\n");
- else if (err)
-- ssb_dprintk(KERN_ERR PFX
-- "Error registering GPIO driver: %i\n", err);
-+ ssb_dbg("Error registering GPIO driver: %i\n", err);
- err = ssb_fetch_invariants(bus, get_invariants);
- if (err) {
- ssb_bus_may_powerdown(bus);
-@@ -870,11 +881,11 @@ int ssb_bus_pcibus_register(struct ssb_b
-
- err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
- if (!err) {
-- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
-- "PCI device %s\n", dev_name(&host_pci->dev));
-+ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
-+ dev_name(&host_pci->dev));
- } else {
-- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
-- " of SSB with error %d\n", err);
-+ ssb_err("Failed to register PCI version of SSB with error %d\n",
-+ err);
- }
-
- return err;
-@@ -895,8 +906,8 @@ int ssb_bus_pcmciabus_register(struct ss
-
- err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
- if (!err) {
-- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
-- "PCMCIA device %s\n", pcmcia_dev->devname);
-+ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
-+ pcmcia_dev->devname);
- }
-
- return err;
-@@ -917,8 +928,8 @@ int ssb_bus_sdiobus_register(struct ssb_
-
- err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
- if (!err) {
-- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
-- "SDIO device %s\n", sdio_func_id(func));
-+ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
-+ sdio_func_id(func));
- }
-
- return err;
-@@ -936,8 +947,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
-
- err = ssb_bus_register(bus, get_invariants, baseaddr);
- if (!err) {
-- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
-- "address 0x%08lX\n", baseaddr);
-+ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
-+ baseaddr);
- }
-
- return err;
-@@ -1331,7 +1342,7 @@ out:
- #endif
- return err;
- error:
-- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
-+ ssb_err("Bus powerdown failed\n");
- goto out;
- }
- EXPORT_SYMBOL(ssb_bus_may_powerdown);
-@@ -1354,7 +1365,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
-
- return 0;
- error:
-- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
-+ ssb_err("Bus powerup failed\n");
- return err;
- }
- EXPORT_SYMBOL(ssb_bus_powerup);
-@@ -1462,15 +1473,13 @@ static int __init ssb_modinit(void)
-
- err = b43_pci_ssb_bridge_init();
- if (err) {
-- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
-- "initialization failed\n");
-+ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
- /* don't fail SSB init because of this */
- err = 0;
- }
- err = ssb_gige_init();
- if (err) {
-- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
-- "driver initialization failed\n");
-+ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
- /* don't fail SSB init because of this */
- err = 0;
- }
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
- }
- return 0;
- error:
-- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
-+ ssb_err("Failed to switch to core %u\n", coreidx);
- return -ENODEV;
- }
-
-@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
- unsigned long flags;
-
- #if SSB_VERBOSE_PCICORESWITCH_DEBUG
-- ssb_printk(KERN_INFO PFX
-- "Switching to %s core, index %d\n",
-- ssb_core_name(dev->id.coreid),
-- dev->core_index);
-+ ssb_info("Switching to %s core, index %d\n",
-+ ssb_core_name(dev->id.coreid),
-+ dev->core_index);
- #endif
-
- spin_lock_irqsave(&bus->bar_lock, flags);
-@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
- return t[crc ^ data];
- }
-
-+static void sprom_get_mac(char *mac, const u16 *in)
-+{
-+ int i;
-+ for (i = 0; i < 3; i++) {
-+ *mac++ = in[i] >> 8;
-+ *mac++ = in[i];
-+ }
-+}
-+
- static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
- {
- int word;
-@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
- u32 spromctl;
- u16 size = bus->sprom_size;
-
-- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
-+ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
- err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
- if (err)
- goto err_ctlreg;
-@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
- err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
- if (err)
- goto err_ctlreg;
-- ssb_printk(KERN_NOTICE PFX "[ 0%%");
-+ ssb_notice("[ 0%%");
- msleep(500);
- for (i = 0; i < size; i++) {
- if (i == size / 4)
-- ssb_printk("25%%");
-+ ssb_cont("25%%");
- else if (i == size / 2)
-- ssb_printk("50%%");
-+ ssb_cont("50%%");
- else if (i == (size * 3) / 4)
-- ssb_printk("75%%");
-+ ssb_cont("75%%");
- else if (i % 2)
-- ssb_printk(".");
-+ ssb_cont(".");
- writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
- mmiowb();
- msleep(20);
-@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
- if (err)
- goto err_ctlreg;
- msleep(500);
-- ssb_printk("100%% ]\n");
-- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
-+ ssb_cont("100%% ]\n");
-+ ssb_notice("SPROM written\n");
-
- return 0;
- err_ctlreg:
-- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
-+ ssb_err("Could not access SPROM control register.\n");
- return err;
- }
-
-@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
- return (s8)gain;
- }
-
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+ SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
- static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
- {
-- int i;
-- u16 v;
- u16 loc[3];
-
- if (out->revision == 3) /* rev 3 moved MAC */
-@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
- loc[1] = SSB_SPROM1_ET0MAC;
- loc[2] = SSB_SPROM1_ET1MAC;
- }
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(loc[0]) + i];
-- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
-- }
-+ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
- if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(loc[1]) + i];
-- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
-- }
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(loc[2]) + i];
-- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
-- }
-+ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
-+ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
- }
- SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
- SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
-@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
- SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
- SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
- SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
-+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
- if (out->revision == 1)
- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
- SSB_SPROM1_BINF_CCODE_SHIFT);
-@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
- SSB_SPROM1_ITSSI_A_SHIFT);
- SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-- if (out->revision >= 2)
-- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+
- SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
- SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-
-@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
- out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_A,
- SSB_SPROM1_AGAIN_A_SHIFT);
-+ if (out->revision >= 2)
-+ sprom_extract_r23(out, in);
- }
-
- /* Revs 4 5 and 8 have partially shared layout */
-@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
-
- static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
- {
-- int i;
-- u16 v;
- u16 il0mac_offset;
-
- if (out->revision == 4)
- il0mac_offset = SSB_SPROM4_IL0MAC;
- else
- il0mac_offset = SSB_SPROM5_IL0MAC;
-- /* extract the MAC address */
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(il0mac_offset) + i];
-- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
-- }
-+
-+ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
-+
- SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
- SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
- SSB_SPROM4_ETHPHY_ET1A_SHIFT);
- SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
-+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
- if (out->revision == 4) {
- SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
- SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
-@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
- static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
- {
- int i;
-- u16 v, o;
-+ u16 o;
- u16 pwr_info_offset[] = {
- SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
- SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
-@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
- ARRAY_SIZE(out->core_pwr_info));
-
- /* extract the MAC address */
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
-- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
-- }
-+ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
-+
- SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
-+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
- SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
- SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
- SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
-@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
- memset(out, 0, sizeof(*out));
-
- out->revision = in[size - 1] & 0x00FF;
-- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
-+ ssb_dbg("SPROM revision %d detected\n", out->revision);
- memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
- memset(out->et1mac, 0xFF, 6);
-
-@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
- * number stored in the SPROM.
- * Always extract r1. */
- out->revision = 1;
-- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
-+ ssb_dbg("SPROM treated as revision %d\n", out->revision);
- }
-
- switch (out->revision) {
-@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
- sprom_extract_r8(out, in);
- break;
- default:
-- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
-- " revision %d detected. Will extract"
-- " v1\n", out->revision);
-+ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
-+ out->revision);
- out->revision = 1;
- sprom_extract_r123(out, in);
- }
-@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
- u16 *buf;
-
- if (!ssb_is_sprom_available(bus)) {
-- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
-+ ssb_err("No SPROM available!\n");
- return -ENODEV;
- }
- if (bus->chipco.dev) { /* can be unavailable! */
-@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
- } else {
- bus->sprom_offset = SSB_SPROM_BASE1;
- }
-- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
-+ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
-
- buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
- if (!buf)
-@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
- * available for this device in some other storage */
- err = ssb_fill_sprom_with_fallback(bus, sprom);
- if (err) {
-- ssb_printk(KERN_WARNING PFX "WARNING: Using"
-- " fallback SPROM failed (err %d)\n",
-- err);
-+ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
-+ err);
- } else {
-- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
-- " revision %d provided by"
-- " platform.\n", sprom->revision);
-+ ssb_dbg("Using SPROM revision %d provided by platform\n",
-+ sprom->revision);
- err = 0;
- goto out_free;
- }
-- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
-- " SPROM CRC (corrupt SPROM)\n");
-+ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
- }
- }
- err = sprom_extract(bus, sprom, buf, bus->sprom_size);
---- a/drivers/ssb/pcihost_wrapper.c
-+++ b/drivers/ssb/pcihost_wrapper.c
-@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
- struct ssb_bus *ssb = pci_get_drvdata(dev);
- int err;
-
-- pci_set_power_state(dev, 0);
-+ pci_set_power_state(dev, PCI_D0);
- err = pci_enable_device(dev);
- if (err)
- return err;
---- a/drivers/ssb/pcmcia.c
-+++ b/drivers/ssb/pcmcia.c
-@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
-
- return 0;
- error:
-- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
-+ ssb_err("Failed to switch to core %u\n", coreidx);
- return err;
- }
-
-@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
- int err;
-
- #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
-- ssb_printk(KERN_INFO PFX
-- "Switching to %s core, index %d\n",
-- ssb_core_name(dev->id.coreid),
-- dev->core_index);
-+ ssb_info("Switching to %s core, index %d\n",
-+ ssb_core_name(dev->id.coreid),
-+ dev->core_index);
- #endif
-
- err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
-@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
-
- return 0;
- error:
-- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
-+ ssb_err("Failed to switch pcmcia segment\n");
- return err;
- }
-
-@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
- bool failed = 0;
- size_t size = SSB_PCMCIA_SPROM_SIZE;
-
-- ssb_printk(KERN_NOTICE PFX
-- "Writing SPROM. Do NOT turn off the power! "
-- "Please stand by...\n");
-+ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
- err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
- if (err) {
-- ssb_printk(KERN_NOTICE PFX
-- "Could not enable SPROM write access.\n");
-+ ssb_notice("Could not enable SPROM write access\n");
- return -EBUSY;
- }
-- ssb_printk(KERN_NOTICE PFX "[ 0%%");
-+ ssb_notice("[ 0%%");
- msleep(500);
- for (i = 0; i < size; i++) {
- if (i == size / 4)
-- ssb_printk("25%%");
-+ ssb_cont("25%%");
- else if (i == size / 2)
-- ssb_printk("50%%");
-+ ssb_cont("50%%");
- else if (i == (size * 3) / 4)
-- ssb_printk("75%%");
-+ ssb_cont("75%%");
- else if (i % 2)
-- ssb_printk(".");
-+ ssb_cont(".");
- err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
- if (err) {
-- ssb_printk(KERN_NOTICE PFX
-- "Failed to write to SPROM.\n");
-+ ssb_notice("Failed to write to SPROM\n");
- failed = 1;
- break;
- }
- }
- err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
- if (err) {
-- ssb_printk(KERN_NOTICE PFX
-- "Could not disable SPROM write access.\n");
-+ ssb_notice("Could not disable SPROM write access\n");
- failed = 1;
- }
- msleep(500);
- if (!failed) {
-- ssb_printk("100%% ]\n");
-- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
-+ ssb_cont("100%% ]\n");
-+ ssb_notice("SPROM written\n");
- }
-
- return failed ? -EBUSY : 0;
-@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
- return -ENOSPC; /* continue with next entry */
-
- error:
-- ssb_printk(KERN_ERR PFX
-+ ssb_err(
- "PCMCIA: Failed to fetch device invariants: %s\n",
- error_description);
- return -ENODEV;
-@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
- res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
- ssb_pcmcia_get_mac, sprom);
- if (res != 0) {
-- ssb_printk(KERN_ERR PFX
-+ ssb_err(
- "PCMCIA: Failed to fetch MAC address\n");
- return -ENODEV;
- }
-@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
- if ((res == 0) || (res == -ENOSPC))
- return 0;
-
-- ssb_printk(KERN_ERR PFX
-+ ssb_err(
- "PCMCIA: Failed to fetch device invariants\n");
- return -ENODEV;
- }
-@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
-
- return 0;
- error:
-- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
-+ ssb_err("Failed to initialize PCMCIA host device\n");
- return err;
- }
---- a/drivers/ssb/scan.c
-+++ b/drivers/ssb/scan.c
-@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
- chipid_fallback = 0x4401;
- break;
- default:
-- ssb_printk(KERN_ERR PFX
-- "PCI-ID not in fallback list\n");
-+ ssb_err("PCI-ID not in fallback list\n");
- }
-
- return chipid_fallback;
-@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
- case 0x4704:
- return 9;
- default:
-- ssb_printk(KERN_ERR PFX
-- "CHIPID not in nrcores fallback list\n");
-+ ssb_err("CHIPID not in nrcores fallback list\n");
- }
-
- return 1;
-@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
- bus->chip_package = 0;
- }
- }
-- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
-- "package 0x%02X\n", bus->chip_id, bus->chip_rev,
-- bus->chip_package);
-+ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
-+ bus->chip_id, bus->chip_rev, bus->chip_package);
- if (!bus->nr_devices)
- bus->nr_devices = chipid_to_nrcores(bus->chip_id);
- if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
-- ssb_printk(KERN_ERR PFX
-- "More than %d ssb cores found (%d)\n",
-- SSB_MAX_NR_CORES, bus->nr_devices);
-+ ssb_err("More than %d ssb cores found (%d)\n",
-+ SSB_MAX_NR_CORES, bus->nr_devices);
- goto err_unmap;
- }
- if (bus->bustype == SSB_BUSTYPE_SSB) {
-@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
- nr_80211_cores++;
- if (nr_80211_cores > 1) {
- if (!we_support_multiple_80211_cores(bus)) {
-- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
-- "802.11 core\n");
-+ ssb_dbg("Ignoring additional 802.11 core\n");
- continue;
- }
- }
-@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
- case SSB_DEV_EXTIF:
- #ifdef CONFIG_SSB_DRIVER_EXTIF
- if (bus->extif.dev) {
-- ssb_printk(KERN_WARNING PFX
-- "WARNING: Multiple EXTIFs found\n");
-+ ssb_warn("WARNING: Multiple EXTIFs found\n");
- break;
- }
- bus->extif.dev = dev;
-@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
- break;
- case SSB_DEV_CHIPCOMMON:
- if (bus->chipco.dev) {
-- ssb_printk(KERN_WARNING PFX
-- "WARNING: Multiple ChipCommon found\n");
-+ ssb_warn("WARNING: Multiple ChipCommon found\n");
- break;
- }
- bus->chipco.dev = dev;
-@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
- case SSB_DEV_MIPS_3302:
- #ifdef CONFIG_SSB_DRIVER_MIPS
- if (bus->mipscore.dev) {
-- ssb_printk(KERN_WARNING PFX
-- "WARNING: Multiple MIPS cores found\n");
-+ ssb_warn("WARNING: Multiple MIPS cores found\n");
- break;
- }
- bus->mipscore.dev = dev;
-@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
- }
- }
- if (bus->pcicore.dev) {
-- ssb_printk(KERN_WARNING PFX
-- "WARNING: Multiple PCI(E) cores found\n");
-+ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
- break;
- }
- bus->pcicore.dev = dev;
---- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
- while (cnt < sprom_size_words) {
- memcpy(tmp, dump, 4);
- dump += 4;
-- err = strict_strtoul(tmp, 16, &parsed);
-+ err = kstrtoul(tmp, 16, &parsed);
- if (err)
- return err;
- sprom[cnt++] = swab16((u16)parsed);
-@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
- goto out_kfree;
- err = ssb_devices_freeze(bus, &freeze);
- if (err) {
-- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
-+ ssb_err("SPROM write: Could not freeze all devices\n");
- goto out_unlock;
- }
- res = sprom_write(bus, sprom);
- err = ssb_devices_thaw(&freeze);
- if (err)
-- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
-+ ssb_err("SPROM write: Could not thaw all devices\n");
- out_unlock:
- mutex_unlock(&bus->sprom_mutex);
- out_kfree:
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -9,16 +9,27 @@
- #define PFX "ssb: "
-
- #ifdef CONFIG_SSB_SILENT
--# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
-+# define ssb_printk(fmt, ...) \
-+ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
- #else
--# define ssb_printk printk
-+# define ssb_printk(fmt, ...) \
-+ printk(fmt, ##__VA_ARGS__)
- #endif /* CONFIG_SSB_SILENT */
-
-+#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
-+#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
-+#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
-+#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
-+#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
-+#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
-+
- /* dprintk: Debugging printk; vanishes for non-debug compilation */
- #ifdef CONFIG_SSB_DEBUG
--# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
-+# define ssb_dbg(fmt, ...) \
-+ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
- #else
--# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
-+# define ssb_dbg(fmt, ...) \
-+ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
- #endif
-
- #ifdef CONFIG_SSB_DEBUG
-@@ -217,6 +228,25 @@ extern u32 ssb_chipco_watchdog_timer_set
- u32 ticks);
- extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
-
-+/* driver_chipcommon_sflash.c */
-+#ifdef CONFIG_SSB_SFLASH
-+int ssb_sflash_init(struct ssb_chipcommon *cc);
-+#else
-+static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
-+{
-+ pr_err("Serial flash not supported\n");
-+ return 0;
-+}
-+#endif /* CONFIG_SSB_SFLASH */
-+
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+extern struct platform_device ssb_pflash_dev;
-+#endif
-+
-+#ifdef CONFIG_SSB_SFLASH
-+extern struct platform_device ssb_sflash_dev;
-+#endif
-+
- #ifdef CONFIG_SSB_DRIVER_EXTIF
- extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
- extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -26,13 +26,14 @@ struct ssb_sprom_core_pwr_info {
-
- struct ssb_sprom {
- u8 revision;
-- u8 il0mac[6]; /* MAC address for 802.11b/g */
-- u8 et0mac[6]; /* MAC address for Ethernet */
-- u8 et1mac[6]; /* MAC address for 802.11a */
-+ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
-+ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
-+ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
- u8 et0phyaddr; /* MII address for enet0 */
- u8 et1phyaddr; /* MII address for enet1 */
- u8 et0mdcport; /* MDIO for enet0 */
- u8 et1mdcport; /* MDIO for enet1 */
-+ u16 dev_id; /* Device ID overriding e.g. PCI ID */
- u16 board_rev; /* Board revision number from SPROM. */
- u16 board_num; /* Board number from SPROM. */
- u16 board_type; /* Board type from SPROM. */
-@@ -340,13 +341,61 @@ enum ssb_bustype {
- #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
- #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
- /* board_type */
-+#define SSB_BOARD_BCM94301CB 0x0406
-+#define SSB_BOARD_BCM94301MP 0x0407
-+#define SSB_BOARD_BU4309 0x040A
-+#define SSB_BOARD_BCM94309CB 0x040B
-+#define SSB_BOARD_BCM4309MP 0x040C
-+#define SSB_BOARD_BU4306 0x0416
- #define SSB_BOARD_BCM94306MP 0x0418
- #define SSB_BOARD_BCM4309G 0x0421
- #define SSB_BOARD_BCM4306CB 0x0417
--#define SSB_BOARD_BCM4309MP 0x040C
-+#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
-+#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
-+#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
-+#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
-+#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
-+#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
-+#define SSB_BOARD_BU4318 0x0447
-+#define SSB_BOARD_CB4318 0x0448
-+#define SSB_BOARD_MPG4318 0x0449
- #define SSB_BOARD_MP4318 0x044A
--#define SSB_BOARD_BU4306 0x0416
--#define SSB_BOARD_BU4309 0x040A
-+#define SSB_BOARD_SD4318 0x044B
-+#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
-+#define SSB_BOARD_BCM94303MP 0x044E
-+#define SSB_BOARD_BCM94306MPM 0x0450
-+#define SSB_BOARD_BCM94306MPL 0x0453
-+#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
-+#define SSB_BOARD_BCM94306MPLNA 0x0457
-+#define SSB_BOARD_BCM94306MPH 0x045B
-+#define SSB_BOARD_BCM94306PCIV 0x045C
-+#define SSB_BOARD_BCM94318MPGH 0x0463
-+#define SSB_BOARD_BU4311 0x0464
-+#define SSB_BOARD_BCM94311MC 0x0465
-+#define SSB_BOARD_BCM94311MCAG 0x0466
-+/* 4321 boards */
-+#define SSB_BOARD_BU4321 0x046B
-+#define SSB_BOARD_BU4321E 0x047C
-+#define SSB_BOARD_MP4321 0x046C
-+#define SSB_BOARD_CB2_4321 0x046D
-+#define SSB_BOARD_CB2_4321_AG 0x0066
-+#define SSB_BOARD_MC4321 0x046E
-+/* 4325 boards */
-+#define SSB_BOARD_BCM94325DEVBU 0x0490
-+#define SSB_BOARD_BCM94325BGABU 0x0491
-+#define SSB_BOARD_BCM94325SDGWB 0x0492
-+#define SSB_BOARD_BCM94325SDGMDL 0x04AA
-+#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
-+#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
-+#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
-+/* 4322 boards */
-+#define SSB_BOARD_BCM94322MC 0x04A4
-+#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
-+#define SSB_BOARD_BCM94322HM 0x04B0
-+#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
-+/* 4312 boards */
-+#define SSB_BOARD_BU4312 0x048A
-+#define SSB_BOARD_BCM4312MCGSG 0x04B5
- /* chip_package */
- #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
- #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
---- a/include/linux/ssb/ssb_driver_gige.h
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
- return 0;
- }
-
--#ifdef CONFIG_BCM47XX
--#include <asm/mach-bcm47xx/nvram.h>
- /* Get the device MAC address */
--static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
--{
-- char buf[20];
-- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
-- return;
-- nvram_parse_macaddr(buf, macaddr);
--}
--#else
--static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
- {
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (!dev)
-+ return -ENODEV;
-+
-+ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
-+ return 0;
- }
--#endif
-
- extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
- struct pci_dev *pdev);
-@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
- {
- return 0;
- }
-+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+{
-+ return -ENODEV;
-+}
-
- #endif /* CONFIG_SSB_DRIVER_GIGE */
- #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
---- a/include/linux/ssb/ssb_driver_mips.h
-+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -20,6 +20,18 @@ struct ssb_pflash {
- u32 window_size;
- };
-
-+#ifdef CONFIG_SSB_SFLASH
-+struct ssb_sflash {
-+ bool present;
-+ u32 window;
-+ u32 blocksize;
-+ u16 numblocks;
-+ u32 size;
-+
-+ void *priv;
-+};
-+#endif
-+
- struct ssb_mipscore {
- struct ssb_device *dev;
-
-@@ -27,6 +39,9 @@ struct ssb_mipscore {
- struct ssb_serial_port serial_ports[4];
-
- struct ssb_pflash pflash;
-+#ifdef CONFIG_SSB_SFLASH
-+ struct ssb_sflash sflash;
-+#endif
- };
-
- extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
-@@ -45,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
- {
- }
-
-+static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
-+{
-+ return 0;
-+}
-+
- #endif /* CONFIG_SSB_DRIVER_MIPS */
-
- #endif /* LINUX_SSB_MIPSCORE_H_ */
---- a/include/linux/ssb/ssb_regs.h
-+++ b/include/linux/ssb/ssb_regs.h
-@@ -172,6 +172,7 @@
- #define SSB_SPROMSIZE_WORDS_R4 220
- #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
- #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
-+#define SSB_SPROMSIZE_WORDS_R10 230
- #define SSB_SPROM_BASE1 0x1000
- #define SSB_SPROM_BASE31 0x0800
- #define SSB_SPROM_REVISION 0x007E
-@@ -289,11 +290,11 @@
- #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
- #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
- #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
--#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
--#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
--#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
--#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
--#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
-+#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */
-+#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
-+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
-+#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
-+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
- #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
- #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
- #define SSB_SPROM4_AGAIN0_SHIFT 0
---- a/arch/mips/bcm47xx/sprom.c
-+++ b/arch/mips/bcm47xx/sprom.c
-@@ -168,6 +168,7 @@ static void nvram_read_alpha2(const char
- static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
- {
-+ nvram_read_u16(prefix, NULL, "devid", &sprom->dev_id, 0, fallback);
- nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff, fallback);
- nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff, fallback);
- nvram_read_u8(prefix, NULL, "ledbh2", &sprom->gpio2, 0xff, fallback);
projects / openwrt / openwrt.git / blobdiff