+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius EAP1300";
- compatible = "engenius,eap1300", "qcom,ipq4019";
-
- soc {
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: orange {
- label = "eap1300:orange:power";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "eap1300:blue:lan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
-
- mesh {
- label = "eap1300:blue:mesh";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "eap1300:blue:wlan2g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "eap1300:yellow:wlan5g";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio54", "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00090000>;
- read-only;
- };
- partition7@180000 {
- label = "0:ART";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
- partition8@190000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x190000 0x1dc0000>;
- };
- partition9@1f50000 {
- label = "u-boot-env";
- reg = <0x01f50000 0x00010000>;
- };
- partition10@1f60000 {
- label = "userconfig";
- reg = <0x01f60000 0x000a0000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
projects / openwrt / openwrt.git / blobdiff