-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "OpenMesh A62";
- compatible = "openmesh,a62", "qcom,ipq4019";
-
- soc {
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART >;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- red {
- label = "a62:red:status";
- gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
-
- power: green {
- label = "a62:green:status";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- blue {
- label = "a62:blue:status";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- /* hw_margin_ms is actually 300s but driver limits it to 60s */
- hw_margin_ms = <60000>;
- always-running;
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- enable-usb-power {
- gpio-hog;
- gpios = <58 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "enable USB2 power";
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- /* partitions are passed via bootloader */
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "OM-A62";
- ieee80211-freq-limit = <5170000 5350000>;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A62";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A62";
- ieee80211-freq-limit = <5470000 5875000>;
-};
projects / openwrt / openwrt.git / blobdiff