+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Repeater 1200";
- compatible = "avm,fritzrepeater-1200";
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_red;
- };
-
- soc {
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- phy-mode = "rgmii-rxid";
- qcom,num_gmac = <1>;
- qcom,single-phy;
- };
- };
-
- key {
- compatible = "gpio-keys";
-
- wps {
- label = "WPS button";
- gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_red: power_red {
- label = "fritzwlan-1200:red:power";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power_green {
- label = "fritzwlan-1200:green:power";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- power_yellow {
- label = "fritzwlan-1200:yellow:power";
- gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <19 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-
- phy-reset-2 {
- line-name = "PHY-reset-2";
- gpios = <47 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "CDT";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "QSEE_B";
- reg = <0x1c0000 0x80000>;
- read-only;
- };
-
- partition@240000 {
- label = "urlader0";
- reg = <0x240000 0x40000>;
- read-only;
- };
-
- partition@280000 {
- label = "urlader1";
- reg = <0x280000 0x40000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "nand-tffs";
- reg = <0x2c0000 0x840000>;
- read-only;
- };
-
- partition@b00000 {
- /* 'kernel1' in AVM firmware */
- label = "uboot0";
- reg = <0xb00000 0x400000>;
- };
-
- partition@f00000 {
- /* 'kernel2' in AVM firmware */
- label = "uboot1";
- reg = <0xf00000 0x400000>;
- };
-
- partition@1300000 {
- label = "ubi";
- reg = <0x1300000 0x6d00000>;
- };
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <0>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
projects / openwrt / openwrt.git / blobdiff