ipq40xx: add support for AVM FRITZ!Repeater 1200

[openwrt/openwrt.git] / target / linux / ipq40xx / files-4.14 / arch / arm / boot / dts / qcom-ipq4019-fritzrepeater-1200.dts

diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
new file mode 100644 (file)
index 0000000..9fe1629
--- /dev/null
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+       model = "AVM FRITZ!Repeater 1200";
+       compatible = "avm,fritzrepeater-1200";
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+               led-upgrade = &power_red;
+       };
+
+       soc {
+               mdio@90000 {
+                       status = "okay";
+                       pinctrl-0 = <&mdio_pins>;
+                       pinctrl-names = "default";
+               };
+
+               tcsr@1949000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1949000 0x100>;
+                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+               };
+
+               ess_tcsr@1953000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1953000 0x1000>;
+                       qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
+               };
+
+               tcsr@1957000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1957000 0x100>;
+                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+               };
+
+               crypto@8e3a000 {
+                       status = "okay";
+               };
+
+               watchdog@b017000 {
+                       status = "okay";
+               };
+
+               ess-switch@c000000 {
+                       switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
+                       switch_lan_bmp = <0x0>; /* lan port bitmap */
+                       switch_wan_bmp = <0x10>; /* wan port bitmap */
+               };
+
+               edma@c080000 {
+                       status = "okay";
+                       phy-mode = "rgmii-rxid";
+                       qcom,num_gmac = <1>;
+                       qcom,single-phy;
+               };
+       };
+
+       key {
+               compatible = "gpio-keys";
+
+               wps {
+                       label = "WPS button";
+                       gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_red: power_red {
+                       label = "fritzwlan-1200:red:power";
+                       gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+               };
+
+               power_green: power_green {
+                       label = "fritzwlan-1200:green:power";
+                       gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+               };
+
+               power_yellow {
+                       label = "fritzwlan-1200:yellow:power";
+                       gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&tlmm {
+       serial_0_pins: serial_pinmux {
+               mux {
+                       pins = "gpio16", "gpio17";
+                       function = "blsp_uart0";
+                       bias-disable;
+               };
+       };
+
+       nand_pins: nand_pins {
+               pullups {
+                       pins = "gpio53", "gpio58", "gpio59";
+                       function = "qpic";
+                       bias-pull-up;
+               };
+
+               pulldowns {
+                       pins = "gpio54", "gpio55", "gpio56",
+                               "gpio57", "gpio60", "gpio61",
+                               "gpio62", "gpio63", "gpio64",
+                               "gpio65", "gpio66", "gpio67",
+                               "gpio68", "gpio69";
+                       function = "qpic";
+                       bias-pull-down;
+               };
+       };
+
+       mdio_pins: mdio_pinmux {
+               mux_1 {
+                       pins = "gpio6";
+                       function = "mdio";
+                       bias-pull-up;
+               };
+               mux_2 {
+                       pins = "gpio7";
+                       function = "mdc";
+                       bias-pull-up;
+               };
+       };
+
+       phy-reset {
+               line-name = "PHY-reset";
+               gpios = <19 GPIO_ACTIVE_HIGH>;
+               gpio-hog;
+               output-high;
+       };
+
+       phy-reset-2 {
+               line-name = "PHY-reset-2";
+               gpios = <47 GPIO_ACTIVE_HIGH>;
+               gpio-hog;
+               output-high;
+       };
+};
+
+&nand {
+       pinctrl-0 = <&nand_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       nand@0 {
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "SBL1";
+                               reg = <0x0 0x80000>;
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               label = "MIBIB";
+                               reg = <0x80000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "QSEE";
+                               reg = <0x100000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@180000 {
+                               label = "CDT";
+                               reg = <0x180000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@1c0000 {
+                               label = "QSEE_B";
+                               reg = <0x1c0000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@240000 {
+                               label = "urlader0";
+                               reg = <0x240000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@280000 {
+                               label = "urlader1";
+                               reg = <0x280000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@2c0000 {
+                               label = "nand-tffs";
+                               reg = <0x2c0000 0x840000>;
+                               read-only;
+                       };
+
+                       partition@b00000 {
+                               /* 'kernel1' in AVM firmware */
+                               label = "uboot0";
+                               reg = <0xb00000 0x400000>;
+                       };
+
+                       partition@f00000 {
+                               /* 'kernel2' in AVM firmware */
+                               label = "uboot1";
+                               reg = <0xf00000 0x400000>;
+                       };
+
+                       partition@1300000 {
+                               label = "ubi";
+                               reg = <0x1300000 0x6d00000>;
+                       };
+               };
+       };
+};
+
+&cryptobam {
+       status = "okay";
+};
+
+&blsp_dma {
+       status = "okay";
+};
+
+&blsp1_uart1 {
+       pinctrl-0 = <&serial_0_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&qpic_bam {
+       status = "okay";
+};
+
+&wifi0 {
+       status = "okay";
+       qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&wifi1 {
+       status = "okay";
+       qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&gmac0 {
+       qcom,phy_mdio_addr = <0>;
+       qcom,poll_required = <1>;
+       vlan_tag = <0 0x20>;
+};