+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-
-#include "qcom-ipq4019.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Sony NCP-HG100/Cellular";
- compatible = "sony,ncp-hg100-cellular";
-
- aliases {
- led-boot = &led_cloud_green;
- led-failsafe = &led_cloud_red;
- led-running = &led_cloud_green;
- led-upgrade = &led_cloud_green;
- label-mac-device = &gmac;
- };
-
- chosen {
- bootargs = "console=ttyMSM0,115200n8 root=/dev/mmcblk0p15 rootfstype=squashfs,ext4";
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x20000000>;
- };
-
- soc {
- tcsr@1949000 {
- status = "okay";
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- status = "okay";
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- status = "okay";
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- status = "okay";
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- dma@7984000 {
- status = "okay";
- };
- };
-
- keys-repeat {
- compatible = "gpio-keys";
- pinctrl-0 = <&keys_pins>;
- pinctrl-names = "default";
- autorepeat;
-
- key-volup {
- label = "volume up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
- linux,input-type = <EV_KEY>;
- };
-
- key-voldown {
- label = "volume down";
- linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- linux,input-type = <EV_KEY>;
- };
-
- key-alexatrigger {
- label = "alexa trigger";
- linux,code = <BTN_0>;
- gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
- linux,input-type = <EV_KEY>;
- };
-
- key-mute {
- label = "mic mute";
- linux,code = <BTN_1>;
- gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_SW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- key-reset {
- label = "reset";
- gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- key-wps {
- label = "setup";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&tlmm {
- pinctrl-0 = <&bt_pins>, <&aud_pins>, <&mcu_pins>;
- pinctrl-names = "default";
-
- /*
- * uart0 is shared for debug console and Z-Wave,
- * use only for debug console in OpenWrt.
- *
- * 1: debug console
- * 0: Z-Wave
- */
- uart0_ctrl_pins: uart0_ctrl_pinmux {
- mux {
- pins = "gpio15";
- function = "gpio";
- output-high;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- /*
- * reset pin for Z-Wave
- * active-low, >= 20ns
- */
- zwave_pins: zwave_pinmux {
- mux {
- pins = "gpio59";
- function = "gpio";
- output-high;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9",
- "gpio10", "gpio11";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- bt_pins: bt_pinmux {
- mux_reset {
- pins = "gpio66";
- function = "gpio";
- output-high;
- };
-
- mux_pwr {
- pins = "gpio68";
- function = "gpio";
- output-high;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- i2c_1_pins: i2c_1_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "blsp_i2c1";
- bias-disable;
- };
- };
-
- keys_pins: keys_pinmux {
- mux_1 {
- pins = "gpio39", "gpio40", "gpio42", "gpio47";
- function = "gpio";
- bias-disable;
- };
-
- mux_2 {
- pins = "gpio2";
- function = "gpio";
- input;
- };
- };
-
- sd_pins: sd_pins {
- mux {
- function = "sdio";
- pins = "gpio23", "gpio24", "gpio25", "gpio26",
- "gpio28", "gpio29", "gpio30", "gpio31";
- drive-strength = <4>;
- };
-
- mux_sd_clk {
- function = "sdio";
- pins = "gpio27";
- drive-strength = <16>;
- };
-
- mux_sd7 {
- function = "sdio";
- pins = "gpio32";
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- aud_pins: aud_pinmux {
- mux {
- pins = "gpio48", "gpio49", "gpio50", "gpio51";
- function = "aud_pin";
- };
- };
-
- alc1304_pins: alc1304_pinmux {
- mux_1 {
- pins = "gpio44";
- function = "gpio";
- bias-disable;
- };
-
- mux_2 {
- pins = "gpio45";
- function = "gpio";
- bias-disable;
- };
- };
-
- cx2902x_reset: cx2902x_pinmux {
- mux_1 {
- pins = "gpio64";
- function = "gpio";
- bias-disable;
- };
-
- mux_2 {
- pins = "gpio65";
- function = "gpio";
- bias-disable;
- };
- };
-
- lte_pins: lte_pinmux {
- mux_en {
- pins = "gpio20";
- function = "gpio";
- output-high;
- };
-
- mux_reset {
- pins = "gpio35";
- function = "gpio";
- input;
- };
- };
-
- usb3_pins: usb3_pinmux {
- mux_en {
- pins = "gpio36";
- function = "gpio";
- output-high;
- };
-
- mux_flt {
- pins = "gpio4";
- function = "gpio";
- input;
- };
- };
-
- mcu_pins: mcu_pinmux {
- mux_boot {
- pins = "gpio38";
- function = "gpio";
- output-low;
- };
-
- mux_reset {
- pins = "gpio5";
- function = "gpio";
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_i2c4 {
- /*
- * There is no driver for the following devices:
- * - CY8C4014LQI@14 : Touch-Sensor for buttons on top
- * - MINI54FDE@15 : MCU for Fan/RGB LED/Thermal control
- * - ALC5629@18 : I2S/PCM Audio DAC
- * - CX20924@41 : Voice Input Processor
- */
- pinctrl-0 = <&i2c_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- led-controller@32 {
- compatible = "ti,lp55231";
- reg = <0x32>;
- clock-mode = /bits/ 8 <0>;
- enable-gpio = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- chan-name = "green:wan";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x0>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WAN;
- };
-
- led@1 {
- chan-name = "blue:wan";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x1>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WAN;
- };
-
- led@2 {
- chan-name = "green:lan";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x2>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- };
-
- led@3 {
- chan-name = "blue:lan";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x3>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- };
-
- led@4 {
- chan-name = "green:wlan-2";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x4>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WLAN;
- function-enumerator = <2>;
- linux,default-trigger = "phy0tpt";
- };
-
- led@5 {
- chan-name = "blue:wlan-2";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x5>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WLAN;
- function-enumerator = <2>;
- };
-
- led@6 {
- chan-name = "red:wan";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x6>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_WAN;
- };
-
- led@7 {
- chan-name = "red:lan";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x7>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_LAN;
- };
-
- led@8 {
- chan-name = "red:wlan-2";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x8>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_WLAN;
- function-enumerator = <2>;
- };
- };
-
- led-controller@33 {
- compatible = "ti,lp55231";
- reg = <0x33>;
- clock-mode = /bits/ 8 <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- chan-name = "green:wlan-5";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x0>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WLAN;
- linux,default-trigger = "phy1tpt";
- function-enumerator = <5>;
- };
-
- led@1 {
- chan-name = "blue:wlan-5";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x1>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WLAN;
- function-enumerator = <5>;
- };
-
- led@2 {
- chan-name = "green:wan-4";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x2>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */
- function-enumerator = <4>; /* WWAN/LTE/4G */
- };
-
- led@3 {
- chan-name = "blue:wan-4";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x3>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */
- function-enumerator = <4>; /* WWAN/LTE/4G */
- };
-
- led_cloud_green: led@4 {
- chan-name = "green:power";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x4>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_POWER;
- };
-
- led@5 {
- chan-name = "blue:power";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x5>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_POWER;
- };
-
- led@6 {
- chan-name = "red:wlan-5";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x6>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_WLAN;
- function-enumerator = <5>;
- };
-
- led@7 {
- chan-name = "red:wan-4";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x7>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */
- function-enumerator = <4>; /* WWAN/LTE/4G */
- };
-
- led_cloud_red: led@8 {
- chan-name = "red:power";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x8>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_POWER;
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>, <&uart0_ctrl_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
-};
-
-&prng {
- status = "okay";
-};
-
-&vqmmc {
- status = "okay";
-};
-
-&sdhci {
- status = "okay";
- pinctrl-0 = <&sd_pins>;
- pinctrl-names = "default";
- vqmmc-supply = <&vqmmc>;
- non-removable;
- #address-cells = <1>;
- #size-cells = <0>;
-
- emmc@0 {
- compatible = "mmc-card";
- reg = <0>;
- };
-};
-
-&usb2 {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-
- pinctrl-0 = <&usb3_pins>, <<e_pins>;
- pinctrl-names = "default";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- device@1 {
- compatible = "usb1bc7,1900";
- reg = <1>;
- };
- };
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport4 {
- status = "okay";
- label = "lan";
-};
-
-&swport5 {
- status = "okay";
- label = "wan";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Sony-NCP-HG100-Cellular";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Sony-NCP-HG100-Cellular";
-};
-
-&watchdog {
- status = "okay";
-};
projects / openwrt / openwrt.git / blobdiff