ipq40xx: split files in 6.1 and 6.6 dedicated directory

[openwrt/openwrt.git] / target / linux / ipq40xx / files / arch / arm / boot / dts / qcom-ipq4018-pa1200.dts

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
deleted file mode 100644 (file)
index f23b58a..0000000
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org>
- * Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai>
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-       model = "Plasma Cloud PA1200";
-       compatible = "plasmacloud,pa1200";
-
-       soc {
-               rng@22000 {
-                       status = "okay";
-               };
-
-               tcsr@194b000 {
-                       /* select hostmode */
-                       compatible = "qcom,tcsr";
-                       reg = <0x194b000 0x100>;
-                       qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-                       status = "okay";
-               };
-
-               tcsr@1949000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1949000 0x100>;
-                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-               };
-
-               ess_tcsr@1953000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1953000 0x1000>;
-                       qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-               };
-
-               tcsr@1957000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1957000 0x100>;
-                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-               };
-
-               usb2: usb2@60f8800 {
-                       status = "okay";
-               };
-
-               crypto@8e3a000 {
-                       status = "okay";
-               };
-
-               watchdog@b017000 {
-                       status = "okay";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       aliases {
-               led-boot = &led_status_purple;
-               led-failsafe = &led_status_yellow;
-               led-running = &led_status_cyan;
-               led-upgrade = &led_status_yellow;
-               label-mac-device = &swport5;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_status_cyan: status_cyan {
-                       function = LED_FUNCTION_STATUS;
-                       color = <LED_COLOR_ID_CYAN>;
-                       gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_status_purple: status_purple {
-                       function = LED_FUNCTION_STATUS;
-                       color = <LED_COLOR_ID_PURPLE>;
-                       gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_status_yellow: status_yellow {
-                       function = LED_FUNCTION_STATUS;
-                       color = <LED_COLOR_ID_YELLOW>;
-                       gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-};
-
-&tlmm {
-       serial_pins: serial_pinmux {
-               mux {
-                       pins = "gpio60", "gpio61";
-                       function = "blsp_uart0";
-                       bias-disable;
-               };
-       };
-
-       spi_0_pins: spi_0_pinmux {
-               pin {
-                       function = "blsp_spi0";
-                       pins = "gpio55", "gpio56", "gpio57";
-                       drive-strength = <12>;
-                       bias-disable;
-               };
-               pin_cs {
-                       function = "gpio";
-                       pins = "gpio54";
-                       drive-strength = <2>;
-                       bias-disable;
-                       output-high;
-               };
-       };
-};
-
-&blsp_dma {
-       status = "okay";
-};
-
-&blsp1_spi1 {
-       pinctrl-0 = <&spi_0_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <24000000>;
-
-               /* partitions are passed via bootloader */
-               partitions {
-                       partition-art {
-                               label = "0:ART";
-
-                               nvmem-layout {
-                                       compatible = "fixed-layout";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       macaddr_gmac0: macaddr@0 {
-                                               reg = <0x0 0x6>;
-                                       };
-
-                                       macaddr_gmac1: macaddr@6 {
-                                               reg = <0x6 0x6>;
-                                       };
-
-                                       precal_art_1000: precal@1000 {
-                                               reg = <0x1000 0x2f20>;
-                                       };
-
-                                       precal_art_5000: precal@5000 {
-                                               reg = <0x5000 0x2f20>;
-                                       };
-                               };
-                       };
-               };
-       };
-};
-
-&blsp1_uart1 {
-       pinctrl-0 = <&serial_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&cryptobam {
-       status = "okay";
-};
-
-&usb2_hs_phy {
-       status = "okay";
-};
-
-&mdio {
-       status = "okay";
-};
-
-&gmac {
-       status = "okay";
-};
-
-&switch {
-       status = "okay";
-};
-
-&swport4 {
-       status = "okay";
-       label = "ethernet2";
-
-       nvmem-cell-names = "mac-address";
-       nvmem-cells = <&macaddr_gmac1>;
-};
-
-&swport5 {
-       status = "okay";
-       label = "ethernet1";
-
-       nvmem-cell-names = "mac-address";
-       nvmem-cells = <&macaddr_gmac0>;
-};
-
-&wifi0 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
-
-       nvmem-cell-names = "pre-calibration";
-       nvmem-cells = <&precal_art_1000>;
-};
-
-&wifi1 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
-
-       nvmem-cell-names = "pre-calibration";
-       nvmem-cells = <&precal_art_5000>;
-};