+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Pakedge WR-1";
- compatible = "pakedge,wr-1";
-
- aliases {
- label-mac-device = &gmac;
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&key_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_power: power {
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_POWER;
- };
-
- wlan2g {
- gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WLAN;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WLAN;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- soc {
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x0040000 0x0020000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x0060000 0x0060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0x00c0000 0x0010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x00d0000 0x0010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0x00e0000 0x0010000>;
- read-only;
- };
-
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0x00f0000 0x0080000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:ART";
- reg = <0x0170000 0x0010000>;
- read-only;
- };
-
- partition@180000 {
- label = "firmware";
- reg = <0x0180000 0x1e80000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
-};
-
-&crypto {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport1 {
- status = "okay";
-
- label = "lan4";
-};
-
-&swport2 {
- status = "okay";
-
- label = "lan3";
-};
-
-&swport3 {
- status = "okay";
-
- label = "lan2";
-};
-
-&swport4 {
- status = "okay";
-
- label = "lan1";
-};
-
-&swport5 {
- status = "okay";
-};
-
-&tlmm {
- key_pins: key_pinmux {
- mux {
- function = "gpio";
- pins = "gpio59";
- bias-pull-up;
- };
- };
-
- led_pins: led_pinmux {
- mux {
- function = "gpio";
- pins = "gpio0", "gpio1", "gpio2";
- bias-none;
- drive-strength = <2>;
- output-low;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- function = "blsp_uart0";
- pins = "gpio60", "gpio61";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- bias-disable;
- drive-strength = <12>;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- bias-disable;
- drive-strength = <2>;
- output-high;
- };
- };
-};
-
-&usb2 {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&watchdog {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "Pakedge-WR-1";
-};
-
-&wifi1 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "Pakedge-WR-1";
-};