ipq40xx: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / ipq40xx / patches-4.19 / 071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch

diff --git a/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch b/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch
deleted file mode 100644 (file)
index b1d69ca..0000000
--- a/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 233c77d4f1d12e4337fba1146d5197f4c0f9107d Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Wed, 25 Jul 2018 10:37:45 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
-
-v1 was the incorrect choice here and sometimes the board
-would not come up properly.
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++--------
- 1 file changed, 17 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -52,7 +52,8 @@
-               cpu@0 {
-                       device_type = "cpu";
-                       compatible = "arm,cortex-a7";
--                      enable-method = "qcom,kpss-acc-v1";
-+                      enable-method = "qcom,kpss-acc-v2";
-+                      next-level-cache = <&L2>;
-                       qcom,acc = <&acc0>;
-                       qcom,saw = <&saw0>;
-                       reg = <0x0>;
-@@ -71,7 +72,8 @@
-               cpu@1 {
-                       device_type = "cpu";
-                       compatible = "arm,cortex-a7";
--                      enable-method = "qcom,kpss-acc-v1";
-+                      enable-method = "qcom,kpss-acc-v2";
-+                      next-level-cache = <&L2>;
-                       qcom,acc = <&acc1>;
-                       qcom,saw = <&saw1>;
-                       reg = <0x1>;
-@@ -90,7 +92,8 @@
-               cpu@2 {
-                       device_type = "cpu";
-                       compatible = "arm,cortex-a7";
--                      enable-method = "qcom,kpss-acc-v1";
-+                      enable-method = "qcom,kpss-acc-v2";
-+                      next-level-cache = <&L2>;
-                       qcom,acc = <&acc2>;
-                       qcom,saw = <&saw2>;
-                       reg = <0x2>;
-@@ -109,7 +112,8 @@
-               cpu@3 {
-                       device_type = "cpu";
-                       compatible = "arm,cortex-a7";
--                      enable-method = "qcom,kpss-acc-v1";
-+                      enable-method = "qcom,kpss-acc-v2";
-+                      next-level-cache = <&L2>;
-                       qcom,acc = <&acc3>;
-                       qcom,saw = <&saw3>;
-                       reg = <0x3>;
-@@ -124,6 +128,11 @@
-                       >;
-                       clock-latency = <256000>;
-               };
-+
-+              L2: l2-cache {
-+                      compatible = "cache";
-+                      cache-level = <2>;
-+              };
-       };
- 
-       pmu {
-@@ -292,22 +301,22 @@
-               };
- 
-                 acc0: clock-controller@b088000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
-                 };
- 
-                 acc1: clock-controller@b098000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
-                 };
- 
-                 acc2: clock-controller@b0a8000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
-                 };
- 
-                 acc3: clock-controller@b0b8000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
-                 };
-