ipq40xx: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / ipq40xx / patches-4.19 / 701-dts-ipq4019-add-mdio-node.patch

diff --git a/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch
deleted file mode 100644 (file)
index 7117a4b..0000000
--- a/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:10:33 +0100
-Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
-
-This patch adds the mdio device-tree node.
-This is where the switch is connected to, so it's needed
-for the ethernet interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -593,6 +593,34 @@
-                       status = "disabled";
-               };
- 
-+              mdio: mdio@90000 {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      compatible = "qcom,ipq4019-mdio";
-+                      reg = <0x90000 0x64>;
-+                      status = "disabled";
-+
-+                      ethphy0: ethernet-phy@0 {
-+                              reg = <0>;
-+                      };
-+
-+                      ethphy1: ethernet-phy@1 {
-+                              reg = <1>;
-+                      };
-+
-+                      ethphy2: ethernet-phy@2 {
-+                              reg = <2>;
-+                      };
-+
-+                      ethphy3: ethernet-phy@3 {
-+                              reg = <3>;
-+                      };
-+
-+                      ethphy4: ethernet-phy@4 {
-+                              reg = <4>;
-+                      };
-+              };
-+
-               usb3_ss_phy: ssphy@9a000 {
-                       compatible = "qcom,usb-ss-ipq4019-phy";
-                       #phy-cells = <0>;