ipq806x: convert ok to okay in dts

[openwrt/openwrt.git] / target / linux / ipq806x / files-4.19 / arch / arm / boot / dts / qcom-ipq8064-r7500v2.dts

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index faec8b35aec7149f91641e7294798af58164e308..471e02c5f10ebf2609f2519abcf7691dc6045ff3 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -136,9 +136,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -149,52 +149,52 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb0_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb1_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
                        pinctrl-0 = <&pcie0_pins>;
                        pinctrl-names = "default";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
@@ -202,7 +202,7 @@
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -296,7 +296,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
 
@@ -312,7 +312,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -403,5 +403,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };