ipq806x: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / ipq806x / files-5.4 / arch / arm / boot / dts / qcom-ipq8064-ap161.dts

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
deleted file mode 100644 (file)
index 6ba3d70..0000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-       model = "Qualcomm IPQ8064/AP161";
-       compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-
-       aliases {
-               mdio-gpio0 = &mdio0;
-       };
-};
-
-&qcom_pinmux {
-       rgmii2_pins: rgmii2_pins {
-               mux {
-                       pins = "gpio27", "gpio28", "gpio29",
-                              "gpio30", "gpio31", "gpio32",
-                              "gpio51", "gpio52", "gpio59",
-                              "gpio60", "gpio61", "gpio62",
-                              "gpio2", "gpio66";
-               };
-       };
-};
-
-&flash {
-       partitions {
-               compatible = "qcom,smem";
-       };
-};
-
-&usb3_0 {
-       status = "okay";
-};
-
-&usb3_1 {
-       status = "okay";
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&pcie1 {
-       status = "okay";
-       max-link-speed = <1>;
-};
-
-&pcie2 {
-       status = "okay";
-};
-
-&nand_controller {
-       status = "okay";
-
-       pinctrl-0 = <&nand_pins>;
-       pinctrl-names = "default";
-
-       nand@0 {
-               reg = <0>;
-               compatible = "qcom,nandcs";
-
-               nand-ecc-strength = <4>;
-               nand-bus-width = <8>;
-               nand-ecc-step-size = <512>;
-
-               partitions {
-                       compatible = "qcom,smem";
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       pinctrl-0 = <&mdio0_pins>;
-       pinctrl-names = "default";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               qca,ar8327-initvals = <
-                       0x00004 0x7600000   /* PAD0_MODE */
-                       0x00008 0x1000000   /* PAD5_MODE */
-                       0x0000c 0x20080     /* PAD6_MODE */
-                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                       0x0007c 0x4e        /* PORT0_STATUS */
-                       0x00094 0x4e        /* PORT6_STATUS */
-                       >;
-       };
-
-       phy4: ethernet-phy@4 {
-               reg = <4>;
-               qca,phy-rgmii-en;
-               qca,txclk-delay-en;
-               qca,rxclk-delay-en;
-       };
-
-       phy3: ethernet-phy@3 {
-               device_type = "ethernet-phy";
-               reg = <3>;
-       };
-};
-
-&gmac0 {
-       status = "okay";
-       phy-mode = "rgmii";
-       qcom,id = <0>;
-
-       pinctrl-0 = <&rgmii2_pins>;
-       pinctrl-names = "default";
-       mdiobus = <&mdio0>;
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
-
-&gmac1 {
-       status = "okay";
-       phy-mode = "rgmii";
-       qcom,id = <1>;
-       mdiobus = <&mdio0>;
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
-
-&gmac2 {
-       status = "okay";
-       phy-mode = "sgmii";
-       qcom,id = <2>;
-       mdiobus = <&mdio0>;
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
-
-&adm_dma {
-       status = "okay";
-};