ipq806x: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / ipq806x / files-5.4 / arch / arm / boot / dts / qcom-ipq8064-db149.dts

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
deleted file mode 100644 (file)
index 8e8d942..0000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-       model = "Qualcomm IPQ8064/DB149";
-       compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-
-       aliases {
-               serial0 = &gsbi2_serial;
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-};
-
-&qcom_pinmux {
-       rgmii0_pins: rgmii0_pins {
-               mux {
-                       pins = "gpio2", "gpio66";
-                       drive-strength = <8>;
-                       bias-disable;
-               };
-       };
-};
-
-&gsbi2 {
-       qcom,mode = <GSBI_PROT_I2C_UART>;
-       status = "okay";
-
-       gsbi2_serial: serial@12490000 {
-               status = "okay";
-       };
-};
-
-&gsbi4 {
-       status = "disabled";
-};
-
-&gsbi4_serial {
-       status = "disabled";
-};
-
-&flash {
-       m25p,fast-read;
-
-       partition@0 {
-               label = "lowlevel_init";
-               reg = <0x0 0x1b0000>;
-       };
-
-       partition@1 {
-               label = "u-boot";
-               reg = <0x1b0000 0x80000>;
-       };
-
-       partition@2 {
-               label = "u-boot-env";
-               reg = <0x230000 0x40000>;
-       };
-
-       partition@3 {
-               label = "caldata";
-               reg = <0x270000 0x40000>;
-       };
-
-       partition@4 {
-               label = "firmware";
-               reg = <0x2b0000 0x1d50000>;
-       };
-};
-
-&usb3_0 {
-       status = "okay";
-};
-
-&usb3_1 {
-       status = "okay";
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&pcie1 {
-       status = "okay";
-};
-
-&pcie2 {
-       status = "okay";
-};
-
-&mdio0 {
-       status = "okay";
-
-       pinctrl-0 = <&mdio0_pins>;
-       pinctrl-names = "default";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               qca,ar8327-initvals = <
-                       0x00004 0x7600000   /* PAD0_MODE */
-                       0x00008 0x1000000   /* PAD5_MODE */
-                       0x0000c 0x80        /* PAD6_MODE */
-                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                       0x0007c 0x4e        /* PORT0_STATUS */
-                       0x00094 0x4e        /* PORT6_STATUS */
-               >;
-       };
-
-       phy4: ethernet-phy@4 {
-               reg = <4>;
-       };
-
-       phy6: ethernet-phy@6 {
-               reg = <6>;
-       };
-
-       phy7: ethernet-phy@7 {
-               reg = <7>;
-       };
-};
-
-&gmac0 {
-       status = "okay";
-       phy-mode = "rgmii";
-       qcom,id = <0>;
-       phy-handle = <&phy4>;
-
-       pinctrl-0 = <&rgmii0_pins>;
-       pinctrl-names = "default";
-};
-
-&gmac1 {
-       status = "okay";
-       phy-mode = "sgmii";
-       qcom,id = <1>;
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
-
-&gmac2 {
-       status = "okay";
-       phy-mode = "sgmii";
-       qcom,id = <2>;
-       phy-handle = <&phy6>;
-};
-
-&gmac3 {
-       status = "okay";
-       phy-mode = "sgmii";
-       qcom,id = <3>;
-       phy-handle = <&phy7>;
-};