ipq806x: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / ipq806x / files-5.4 / arch / arm / boot / dts / qcom-ipq8064-ea8500.dts

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
deleted file mode 100644 (file)
index 9b01ae0..0000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-#include "qcom-ipq8064-eax500.dtsi"
-
-/ {
-       model = "Linksys EA8500 WiFi Router";
-       compatible = "linksys,ea8500", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       aliases {
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               wps {
-                       label = "green:wps";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_power: power {
-                       label = "white:power";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               wifi {
-                       label = "green:wifi";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&qcom_pinmux {
-       button_pins: button_pins {
-               mux {
-                       pins = "gpio65", "gpio67", "gpio68";
-                       function = "gpio";
-                       drive-strength = <2>;
-                       bias-pull-up;
-               };
-       };
-
-       led_pins: led_pins {
-               mux {
-                       pins = "gpio6", "gpio53", "gpio54";
-                       function = "gpio";
-                       drive-strength = <2>;
-                       bias-pull-up;
-               };
-       };
-};
-
-&sata_phy {
-       status = "okay";
-};
-
-&sata {
-       status = "okay";
-};
-
-&partitions {
-       partition@5f80000 {
-               label = "syscfg";
-               reg = <0x5f80000 0x2080000>;
-       };
-};
-
-&mdio0 {
-       phy4: ethernet-phy@4 {
-               reg = <4>;
-       };
-};
-
-&gmac1 {
-       qcom,phy_mdio_addr = <4>;
-       qcom,poll_required = <1>;
-       qcom,rgmii_delay = <0>;
-       qcom,emulation = <0>;
-};
-
-/* LAN */
-&gmac2 {
-       qcom,phy_mdio_addr = <0>;       /* none */
-       qcom,poll_required = <0>;       /* no polling */
-       qcom,rgmii_delay = <0>;
-       qcom,emulation = <0>;
-};