-/dts-v1/;
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "qcom-ipq8064.dtsi"
/ {
model = "Qualcomm IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
- interrupt-parent = <&intc>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2>;
- qcom,acc = <&acc0>;
- qcom,saw = <&saw0>;
- clocks = <&kraitcc 0>, <&kraitcc 4>;
- clock-names = "cpu", "l2";
- qcom,imem = <&qfprom>;
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2a>;
- voltage-tolerance = <5>;
- cooling-min-state = <0>;
- cooling-max-state = <10>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
- cpu1: cpu@1 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2>;
- qcom,acc = <&acc1>;
- qcom,saw = <&saw1>;
- clocks = <&kraitcc 1>, <&kraitcc 4>;
- clock-names = "cpu", "l2";
- qcom,imem = <&qfprom>;
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2b>;
- cooling-min-state = <0>;
- cooling-max-state = <10>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- qcom,saw = <&saw_l2>;
- };
-
- qcom,l2 {
- qcom,l2-rates = <384000000 1000000000 1200000000>;
- };
-
- idle-states {
- CPU_SPC: spc {
- compatible = "qcom,idle-state-spc",
- "arm,idle-state";
- entry-latency-us = <400>;
- exit-latency-us = <900>;
- min-residency-us = <3000>;
- };
- };
- };
-
- thermal-zones {
- cpu-thermal0 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&gcc 5>;
- coefficients = <1132 0>;
-
- trips {
- cpu_alert0: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit0: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu-thermal1 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&gcc 6>;
- coefficients = <1132 0>;
-
- trips {
- cpu_alert1: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit1: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu-thermal2 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&gcc 7>;
- coefficients = <1199 0>;
-
- trips {
- cpu_alert2: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit2: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu-thermal3 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&gcc 8>;
- coefficients = <1132 0>;
-
- trips {
- cpu_alert3: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit3: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
- cpu-pmu {
- compatible = "qcom,krait-pmu";
- interrupts = <1 10 0x304>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- nss@40000000 {
- reg = <0x40000000 0x1000000>;
- no-map;
- };
-
- smem: smem@41000000 {
- reg = <0x41000000 0x200000>;
- no-map;
- };
- };
-
- clocks {
-
- cxo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- pxo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- #clock-cells = <0>;
- };
- };
-
- kraitcc: clock-controller {
- compatible = "qcom,krait-cc-v1";
- #clock-cells = <1>;
- };
qcom,pvs {
qcom,pvs-format-a;
};
soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "simple-bus";
-
- lpass@28100000 {
- compatible = "qcom,lpass-cpu";
- status = "disabled";
- clocks = <&lcc AHBIX_CLK>,
- <&lcc MI2S_OSR_CLK>,
- <&lcc MI2S_BIT_CLK>;
- clock-names = "ahbix-clk",
- "mi2s-osr-clk",
- "mi2s-bit-clk";
- interrupts = <0 85 1>;
- interrupt-names = "lpass-irq-lpaif";
- reg = <0x28100000 0x10000>;
- reg-names = "lpass-lpaif";
- };
-
- qfprom: qfprom@700000 {
- compatible = "qcom,qfprom", "syscon";
- reg = <0x00700000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- tsens_calib: calib {
- reg = <0x400 0x10>;
- };
- tsens_backup: backup_calib {
- reg = <0x410 0x10>;
- };
- };
rpm@108000 {
- compatible = "qcom,rpm-ipq8064";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
-
- interrupts = <0 19 0>,
- <0 21 0>,
- <0 22 0>;
- interrupt-names = "ack",
- "err",
- "wakeup";
-
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&gcc RPM_MSG_RAM_H_CLK>;
- clock-names = "ram";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- smb208_regulators {
- compatible = "qcom,rpm-smb208-regulators";
-
- smb208_s1a: s1a {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
- qcom,switch-mode-frequency = <1200000>;
- };
-
- smb208_s1b: s1b {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
- qcom,switch-mode-frequency = <1200000>;
- };
+ regulators {
smb208_s2a: s2a {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
- qcom,switch-mode-frequency = <1200000>;
};
smb208_s2b: s2b {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
- qcom,switch-mode-frequency = <1200000>;
};
};
};
- rng@1a500000 {
- compatible = "qcom,prng";
- reg = <0x1a500000 0x200>;
- clocks = <&gcc PRNG_CLK>;
- clock-names = "core";
- };
-
- qcom,msm-imem@2A03F000 {
- compatible = "qcom,msm-imem";
- reg = <0x2A03F000 0x1000>; /* Address and size of IMEM */
- ranges = <0x0 0x2A03F000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- download_mode@0 {
- compatible = "qcom,msm-imem-download_mode";
- reg = <0x0 8>;
- };
-
- restart_reason@65c {
- compatible = "qcom,msm-imem-restart_reason";
- reg = <0x65c 4>;
- };
-
- l2_dump_offset@14 {
- compatible = "qcom,msm-imem-l2_dump_offset";
- reg = <0x14 8>;
- };
- };
-
- qcom_pinmux: pinmux@800000 {
- compatible = "qcom,ipq8064-pinctrl";
- reg = <0x800000 0x4000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 16 0x4>;
-
- pcie0_pins: pcie0_pinmux {
- mux {
- pins = "gpio3";
- function = "pcie1_rst";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie1_pins: pcie1_pinmux {
- mux {
- pins = "gpio48";
- function = "pcie2_rst";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie2_pins: pcie2_pinmux {
- mux {
- pins = "gpio63";
- function = "pcie3_rst";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
- };
- };
-
- intc: interrupt-controller@2000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x02000000 0x1000>,
- <0x02002000 0x1000>;
- };
-
- timer@200a000 {
- compatible = "qcom,kpss-timer", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>,
- <1 4 0x301>,
- <1 5 0x301>;
- reg = <0x0200a000 0x100>;
- clock-frequency = <25000000>,
- <32768>;
- clocks = <&sleep_clk>;
- clock-names = "sleep";
- cpu-offset = <0x80000>;
- };
-
- acc0: clock-controller@2088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
- clock-output-names = "acpu0_aux";
- };
-
- acc1: clock-controller@2098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
- clock-output-names = "acpu1_aux";
- };
-
- l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x2011000 0x1000>;
- clock-output-names = "acpu_l2_aux";
- };
-
- saw0: regulator@2089000 {
- compatible = "qcom,saw2", "syscon";
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
- saw1: regulator@2099000 {
- compatible = "qcom,saw2", "syscon";
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
- saw_l2: regulator@02012000 {
- compatible = "qcom,saw2", "syscon";
- reg = <0x02012000 0x1000>;
- regulator;
- };
-
- sic_non_secure: sic-non-secure@12100000 {
- compatible = "syscon";
- reg = <0x12100000 0x10000>;
- };
-
- gsbi1: gsbi@12440000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <1>;
- reg = <0x12440000 0x100>;
- clocks = <&gcc GSBI1_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart1: serial@12450000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x12450000 0x1000>,
- <0x12440000 0x1000>;
- interrupts = <0 193 0x0>;
- clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@12460000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x12460000 0x1000>;
- interrupts = <0 194 0>;
-
- clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- };
-
- gsbi2: gsbi@12480000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <2>;
- reg = <0x12480000 0x100>;
- clocks = <&gcc GSBI2_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart2: serial@12490000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x12490000 0x1000>,
- <0x12480000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@124a0000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x124a0000 0x1000>;
- interrupts = <0 196 0>;
-
- clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- };
-
- gsbi4: gsbi@16300000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <4>;
- reg = <0x16300000 0x100>;
- clocks = <&gcc GSBI4_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart4: serial@16340000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16340000 0x1000>,
- <0x16300000 0x1000>;
- interrupts = <0 152 0x0>;
- clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@16380000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x16380000 0x1000>;
- interrupts = <0 153 0>;
-
- clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- gsbi5: gsbi@1a200000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <5>;
- reg = <0x1a200000 0x100>;
- clocks = <&gcc GSBI5_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart5: serial@1a240000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x1a240000 0x1000>,
- <0x1a200000 0x1000>;
- interrupts = <0 154 0x0>;
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@1a280000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x1a280000 0x1000>;
- interrupts = <0 155 0>;
-
- clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi@1a280000 {
- compatible = "qcom,spi-qup-v1.1.1";
- reg = <0x1a280000 0x1000>;
- interrupts = <0 155 0>;
-
- clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- gsbi6: gsbi@16500000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <6>;
- reg = <0x16500000 0x100>;
- clocks = <&gcc GSBI6_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart6: serial@16540000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16540000 0x1000>,
- <0x16500000 0x1000>;
- interrupts = <0 156 0x0>;
- clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@16580000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x16580000 0x1000>;
- interrupts = <0 157 0>;
-
- clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi@16580000 {
- compatible = "qcom,spi-qup-v1.1.1";
- reg = <0x16580000 0x1000>;
- interrupts = <0 157 0>;
-
- clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- gsbi7: gsbi@16600000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <7>;
- reg = <0x16600000 0x100>;
- clocks = <&gcc GSBI7_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart7: serial@16640000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16640000 0x1000>,
- <0x16600000 0x1000>;
- interrupts = <0 158 0x0>;
- clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@16680000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x16680000 0x1000>;
- interrupts = <0 159 0>;
-
- clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- };
-
- sata_phy: sata-phy@1b400000 {
- compatible = "qcom,ipq806x-sata-phy";
- reg = <0x1b400000 0x200>;
-
- clocks = <&gcc SATA_PHY_CFG_CLK>;
- clock-names = "cfg";
-
- #phy-cells = <0>;
- status = "disabled";
- };
-
- sata@29000000 {
- compatible = "qcom,ipq806x-ahci", "generic-ahci";
- reg = <0x29000000 0x180>;
-
- interrupts = <0 209 0x0>;
-
- clocks = <&gcc SFAB_SATA_S_H_CLK>,
- <&gcc SATA_H_CLK>,
- <&gcc SATA_A_CLK>,
- <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- clock-names = "slave_face", "iface", "core",
- "rxoob", "pmalive";
-
- assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
- assigned-clock-rates = <100000000>, <100000000>;
-
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- status = "disabled";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x00500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-ipq8064";
- reg = <0x00900000 0x4000>;
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- #thermal-sensor-cells = <1>;
- };
-
- lcc: clock-controller@28000000 {
- compatible = "qcom,lcc-ipq8064";
- reg = <0x28000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- tcsr: syscon@1a400000 {
- compatible = "qcom,tcsr-ipq8064", "syscon";
- reg = <0x1a400000 0x100>;
- };
-
- qcom,msm-thermal {
- compatible = "qcom,msm-thermal";
- qcom,sensor-id = <0>;
- qcom,poll-ms = <250>;
- qcom,limit-temp = <105>;
- qcom,temp-hysteresis = <10>;
- qcom,freq-step = <2>;
- qcom,core-limit-temp = <115>;
- qcom,core-temp-hysteresis = <10>;
- qcom,core-control-mask = <0xe>;
- };
-
- sfpb_mutex_block: syscon@1200600 {
- compatible = "syscon";
- reg = <0x01200600 0x100>;
- };
-
- hs_phy_1: phy@100f8800 {
- compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x100f8800 0x30>;
- clocks = <&gcc USB30_1_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- ss_phy_1: phy@100f8830 {
- compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x100f8830 0x30>;
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- hs_phy_0: phy@110f8800 {
- compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x110f8800 0x30>;
- clocks = <&gcc USB30_0_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- ss_phy_0: phy@110f8830 {
- compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x110f8830 0x30>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb3_0: usb30@0 {
- compatible = "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "core";
-
- syscon-tcsr = <&tcsr 0xb0 1>;
-
- ranges;
-
- status = "disabled";
- resets = <&gcc USB30_0_MASTER_RESET>;
- reset-names = "usb30_mstr_rst";
-
- dwc3@11000000 {
- compatible = "snps,dwc3";
- reg = <0x11000000 0xcd00>;
- interrupts = <0 110 0x4>;
- phys = <&hs_phy_0>, <&ss_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- snps,dis_u3_susphy_quirk;
- };
- };
-
- usb3_1: usb30@1 {
- compatible = "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "core";
-
- syscon-tcsr = <&tcsr 0xb0 0>;
-
- ranges;
-
- status = "disabled";
-
- dwc3@10000000 {
- compatible = "snps,dwc3";
- reg = <0x10000000 0xcd00>;
- interrupts = <0 205 0x4>;
- phys = <&hs_phy_1>, <&ss_phy_1>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- snps,dis_u3_susphy_quirk;
- };
- };
-
- pcie0: pci@1b500000 {
- compatible = "qcom,pcie-v0";
- reg = <0x1b500000 0x1000
- 0x1b502000 0x80
- 0x1b600000 0x100
- 0x0ff00000 0x100000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <0>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
- 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc PCIE_A_CLK>,
- <&gcc PCIE_H_CLK>,
- <&gcc PCIE_PHY_CLK>,
- <&gcc PCIE_AUX_CLK>,
- <&gcc PCIE_ALT_REF_CLK>;
- clock-names = "core", "iface", "phy", "aux", "ref";
-
- assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_ACLK_RESET>,
- <&gcc PCIE_HCLK_RESET>,
- <&gcc PCIE_POR_RESET>,
- <&gcc PCIE_PCI_RESET>,
- <&gcc PCIE_PHY_RESET>,
- <&gcc PCIE_EXT_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-
- perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-
- status = "disabled";
- };
-
- pcie1: pci@1b700000 {
- compatible = "qcom,pcie-v0";
- reg = <0x1b700000 0x1000
- 0x1b702000 0x80
- 0x1b800000 0x100
- 0x31f00000 0x100000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <1>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
- 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc PCIE_1_A_CLK>,
- <&gcc PCIE_1_H_CLK>,
- <&gcc PCIE_1_PHY_CLK>,
- <&gcc PCIE_1_AUX_CLK>,
- <&gcc PCIE_1_ALT_REF_CLK>;
- clock-names = "core", "iface", "phy", "aux", "ref";
-
- assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_1_ACLK_RESET>,
- <&gcc PCIE_1_HCLK_RESET>,
- <&gcc PCIE_1_POR_RESET>,
- <&gcc PCIE_1_PCI_RESET>,
- <&gcc PCIE_1_PHY_RESET>,
- <&gcc PCIE_1_EXT_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
-
- perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-
- status = "disabled";
- };
-
- pcie2: pci@1b900000 {
- compatible = "qcom,pcie-v0";
- reg = <0x1b900000 0x1000
- 0x1b902000 0x80
- 0x1ba00000 0x100
- 0x35f00000 0x100000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <2>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
- 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc PCIE_2_A_CLK>,
- <&gcc PCIE_2_H_CLK>,
- <&gcc PCIE_2_PHY_CLK>,
- <&gcc PCIE_2_AUX_CLK>,
- <&gcc PCIE_2_ALT_REF_CLK>;
- clock-names = "core", "iface", "phy", "aux", "ref";
-
- assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_2_ACLK_RESET>,
- <&gcc PCIE_2_HCLK_RESET>,
- <&gcc PCIE_2_POR_RESET>,
- <&gcc PCIE_2_PCI_RESET>,
- <&gcc PCIE_2_PHY_RESET>,
- <&gcc PCIE_2_EXT_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie2_pins>;
- pinctrl-names = "default";
-
- perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-
- status = "disabled";
- };
-
- adm_dma: dma@18300000 {
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
- #dma-cells = <1>;
-
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- clock-names = "core", "iface";
-
- resets = <&gcc ADM0_RESET>,
- <&gcc ADM0_PBUS_RESET>,
- <&gcc ADM0_C0_RESET>,
- <&gcc ADM0_C1_RESET>,
- <&gcc ADM0_C2_RESET>;
- reset-names = "clk", "pbus", "c0", "c1", "c2";
- qcom,ee = <0>;
-
- status = "disabled";
- };
-
- nand@1ac00000 {
- compatible = "qcom,ebi2-nandc";
- reg = <0x1ac00000 0x800>;
-
- clocks = <&gcc EBI2_CLK>,
- <&gcc EBI2_AON_CLK>;
- clock-names = "core", "aon";
-
- dmas = <&adm_dma 3>;
- dma-names = "rxtx";
- qcom,cmd-crci = <15>;
- qcom,data-crci = <3>;
-
- status = "disabled";
- };
-
- nss_common: syscon@03000000 {
- compatible = "syscon";
- reg = <0x03000000 0x0000FFFF>;
- };
-
- qsgmii_csr: syscon@1bb00000 {
- compatible = "syscon";
- reg = <0x1bb00000 0x000001FF>;
- };
-
- gmac0: ethernet@37000000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37000000 0x200000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE1_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE1_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
- gmac1: ethernet@37200000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37200000 0x200000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE2_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE2_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
- gmac2: ethernet@37400000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37400000 0x200000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE3_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE3_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
- gmac3: ethernet@37600000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37600000 0x200000>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE4_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE4_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
};
};
};
-
- sfpb_mutex: sfpb-mutex {
- compatible = "qcom,sfpb-mutex";
- syscon = <&sfpb_mutex_block 4 4>;
-
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem>;
- hwlocks = <&sfpb_mutex 3>;
- };
};
projects / openwrt / openwrt.git / blobdiff