ipq806x: backport cpufreq changes to 5.4
[openwrt/openwrt.git] / target / linux / ipq806x / patches-5.4 / 0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch
diff --git a/target/linux/ipq806x/patches-5.4/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-5.4/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch
deleted file mode 100644 (file)
index 910c2b1..0000000
+++ /dev/null
@@ -1,199 +0,0 @@
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -39,20 +39,85 @@ static struct freq_attr *cpufreq_dt_attr
-       NULL,
- };
-+struct shared_data {
-+      unsigned long *curr_freq_table;
-+      unsigned long curr_l2_freq;
-+      unsigned long curr_l2_volt;
-+};
-+
-+static struct shared_data *cpus_shared_data;
-+
- static int set_target(struct cpufreq_policy *policy, unsigned int index)
- {
-       struct private_data *priv = policy->driver_data;
-       unsigned long freq = policy->freq_table[index].frequency;
-+      struct clk *l2_clk = policy->l2_clk;
-+      struct regulator *l2_regulator = policy->l2_regulator;
-+      unsigned long l2_freq, target_l2_freq;
-+      unsigned long l2_vol, target_l2_volt;
-+      unsigned long target_freq;
-       int ret;
-       mutex_lock(&priv->lock);
-       ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
-       if (!ret) {
-+              if (policy->l2_rate_set) {
-+                      int cpu, l2_index, tol = 0;
-+                      target_freq = freq * 1000;
-+
-+                      cpus_shared_data->curr_freq_table[policy->cpu] = target_freq;
-+                      for_each_present_cpu(cpu)
-+                              if (cpu != policy->cpu)
-+                                      target_freq = max(target_freq, cpus_shared_data->curr_freq_table[cpu]);
-+
-+                      for (l2_index = 2; l2_index > 0; l2_index--)
-+                              if (target_freq >= policy->l2_cpufreq[l2_index])
-+                                      break;
-+
-+                      l2_freq = cpus_shared_data->curr_l2_freq;
-+                      target_l2_freq = policy->l2_rate[l2_index];
-+
-+                      if (l2_freq != target_l2_freq) {
-+
-+                              /*
-+                               * Set to idle bin if switching from normal to high bin 
-+                               * or vice versa
-+                               */
-+                              if ( (l2_index == 2 && l2_freq == policy->l2_rate[1]) ||
-+                                       (l2_index == 1 && l2_freq == policy->l2_rate[2]) ) {
-+                                      ret = clk_set_rate(l2_clk, policy->l2_rate[0]);
-+                                      if (ret)
-+                                              goto exit;
-+                              }
-+
-+                              /* scale l2 with the core */
-+                              ret = clk_set_rate(l2_clk, target_l2_freq);
-+                              if (ret)
-+                                      goto exit;
-+                              cpus_shared_data->curr_l2_freq = target_l2_freq;
-+
-+                              if (policy->l2_volt_set) {
-+
-+                                      l2_vol = cpus_shared_data->curr_l2_volt;
-+                                      target_l2_volt = policy->l2_volt[l2_index];
-+
-+                                      if (l2_vol != target_l2_volt) {
-+                                              tol = target_l2_volt * policy->l2_volt_tol / 100;
-+                                              ret = regulator_set_voltage_tol(l2_regulator,target_l2_volt,tol);
-+                                              if (ret)
-+                                                      goto exit;
-+                                              cpus_shared_data->curr_l2_volt = target_l2_volt;
-+                                      }
-+                              }
-+                      }
-+              }
-               priv->opp_freq = freq * 1000;
-               arch_set_freq_scale(policy->related_cpus, freq,
-                                   policy->cpuinfo.max_freq);
-       }
-+
-+exit:
-       mutex_unlock(&priv->lock);
-       return ret;
-@@ -195,6 +260,9 @@ static int cpufreq_init(struct cpufreq_p
-       bool fallback = false;
-       const char *name;
-       int ret;
-+      struct device_node *np, *l2_np;
-+      struct clk *l2_clk = NULL;
-+      struct regulator *l2_regulator = NULL;
-       cpu_dev = get_cpu_device(policy->cpu);
-       if (!cpu_dev) {
-@@ -302,6 +370,57 @@ static int cpufreq_init(struct cpufreq_p
-       policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
-+      policy->l2_rate_set = false;
-+      policy->l2_volt_set = false;
-+
-+      l2_clk = clk_get(cpu_dev, "l2");
-+      if (!IS_ERR(l2_clk))
-+              policy->l2_clk = l2_clk;
-+
-+      l2_np = of_find_node_by_name(NULL, "qcom,l2");
-+      if (l2_np) {
-+              struct device_node *vdd;
-+              np = of_node_get(priv->cpu_dev->of_node);
-+
-+              if (np)
-+                      of_property_read_u32(np, "voltage-tolerance", &policy->l2_volt_tol);
-+
-+              of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
-+              if (policy->l2_rate[0] && policy->l2_rate[1] && policy->l2_rate[2]) {
-+                      policy->l2_rate_set = true;
-+                      of_property_read_u32_array(l2_np, "qcom,l2-cpufreq", policy->l2_cpufreq, 3);
-+                      of_property_read_u32_array(l2_np, "qcom,l2-volt", policy->l2_volt, 3);
-+              } else
-+                      pr_warn("L2: failed to parse L2 rates\n");
-+
-+              if (!policy->l2_cpufreq[0] && !policy->l2_cpufreq[1] && 
-+                      !policy->l2_cpufreq[2] && policy->l2_rate_set) {
-+                      int i;
-+
-+                      pr_warn("L2: failed to parse target cpu freq, using defaults\n");
-+                      for (i = 0; i < 3; i++)
-+                              policy->l2_cpufreq[i] = policy->l2_rate[i];
-+              }
-+
-+              if (policy->l2_volt[0] && policy->l2_volt[1] && policy->l2_volt[2] &&
-+                      policy->l2_volt_tol && policy->l2_rate_set) {
-+                      vdd = of_parse_phandle(l2_np, "qcom,l2-supply", 0);
-+
-+                      if (vdd) {
-+                              l2_regulator = devm_regulator_get(cpu_dev, vdd->name);
-+                              if (!IS_ERR(l2_regulator)) {
-+                                      policy->l2_regulator = l2_regulator;
-+                                      policy->l2_volt_set = true;
-+                              } else {
-+                                      pr_warn("failed to get l2 supply\n");
-+                                      l2_regulator = NULL;
-+                              }
-+
-+                              of_node_put(vdd);
-+                      }
-+              }
-+      }
-+
-       /* Support turbo/boost mode */
-       if (policy_has_boost_freq(policy)) {
-               /* This gets disabled by core on driver unregister */
-@@ -401,6 +520,14 @@ static int dt_cpufreq_probe(struct platf
-       if (ret)
-               return ret;
-+      cpus_shared_data = kzalloc(sizeof(struct shared_data), GFP_KERNEL);
-+      if (!cpus_shared_data)
-+              return -ENOMEM;
-+
-+      cpus_shared_data->curr_freq_table = kzalloc(sizeof(int) * CONFIG_NR_CPUS, GFP_KERNEL);
-+      if (!cpus_shared_data->curr_freq_table)
-+              return -ENOMEM;
-+
-       if (data) {
-               if (data->have_governor_per_policy)
-                       dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
-@@ -419,6 +546,8 @@ static int dt_cpufreq_probe(struct platf
- static int dt_cpufreq_remove(struct platform_device *pdev)
- {
-+      kfree(cpus_shared_data->curr_freq_table);
-+      kfree(cpus_shared_data);
-       cpufreq_unregister_driver(&dt_cpufreq_driver);
-       return 0;
- }
---- a/include/linux/cpufreq.h
-+++ b/include/linux/cpufreq.h
-@@ -58,7 +58,15 @@ struct cpufreq_policy {
-                                               should set cpufreq */
-       unsigned int            cpu;    /* cpu managing this policy, must be online */
--      struct clk              *clk;
-+      struct clk                      *clk;
-+      struct clk                      *l2_clk; /* L2 clock */
-+      struct regulator        *l2_regulator; /* L2 supply */
-+      unsigned int            l2_rate[3]; /* L2 bus clock rate */
-+      bool                            l2_rate_set;
-+      unsigned int            l2_cpufreq[3]; /* L2 target CPU frequency */
-+      unsigned int            l2_volt[3]; /* L2 voltage array */
-+      bool                            l2_volt_set;
-+      unsigned int            l2_volt_tol; /* L2 voltage tolerance */
-       struct cpufreq_cpuinfo  cpuinfo;/* see above */
-       unsigned int            min;    /* in kHz */