lantiq: move dts files to thir own folder

[openwrt/openwrt.git] / target / linux / lantiq / dts / ARV4525PW.dts

diff --git a/target/linux/lantiq/dts/ARV4525PW.dts b/target/linux/lantiq/dts/ARV4525PW.dts
new file mode 100644 (file)
index 0000000..e2d3860
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV4525PW.dts
@@ -0,0 +1,153 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+       model = "ARV4525PW - Speedport W501V Typ A";
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       sram@1F000000 {
+               vmmc@107000 {
+                       status = "okay";
+                       gpios = <&gpio 31 0>;
+               };
+       };
+
+       fpi@10000000 {
+               localbus@0 {
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x2000000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x00000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@10000 {
+                                       label = "uboot_env";
+                                       reg = <0x10000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@20000 {
+                                       label = "linux";
+                                       reg = <0x20000 0x3d0000>;
+                               };
+
+                               partition@400000 {
+                                       label = "boardconfig";
+                                       reg = <0x3f0000 0x10000>;
+                                       read-only;
+                               };
+                       };
+
+                       mac_addr {
+                               compatible = "lantiq,eth-mac";
+                               reg = <0 0x3f0016 0x6>;
+                               mac-increment = <2>;
+                       };
+
+                       ath5k_eep {
+                               compatible = "ath5k,eeprom";
+                               reg = <0 0x3f0400 0x800>;
+                               ath,mac-offset = <0>;
+                               ath,eep-swap;
+                       };
+               };
+
+               gpio: pinmux@E100B10 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       state_default: pinmux {
+                               pci_in {
+                                       lantiq,groups = "req1";
+                                       lantiq,function = "pci";
+                                       lantiq,open-drain = <1>;
+                                       lantiq,pull = <2>;
+                                       lantiq,output = <0>;
+                               };
+                               pci_out {
+                                       lantiq,groups = "gnt1";
+                                       lantiq,function = "pci";
+                                       lantiq,output = <1>;
+                               };
+                               pci_rst {
+                                       lantiq,pins = "io21";
+                                       lantiq,pull = <2>;
+                                       lantiq,output = <1>;
+                               };
+                               relay {
+                                       lantiq,pins = "io31";
+                                       lantiq,output = <1>;
+                               };
+                       };
+               };
+
+               etop@E180000 {
+                       phy-mode = "mii";
+               };
+
+               pci@E105400 {
+                       status = "okay";
+                       gpio-reset = <&gpio 21 0>;
+               };
+
+       };
+
+/*
+#define ARV4525PW_PHYRESET     13
+#define ARV4525PW_RELAY                31
+*/
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 29 1>;
+                       linux,code = <0x211>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               fxo {
+                       label = "fxo";
+                       gpios = <&gpio 4 1>;
+               };
+               fxs {
+                       label = "fxs";
+                       gpios = <&gpio 5 1>;
+               };
+               dsl {
+                       label = "dsl";
+                       gpios = <&gpio 6 1>;
+               };
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 8 1>;
+               };
+               online {
+                       /*label = "online"; - we dont have a power led, lets use this one */
+                       label = "power";
+                       gpios = <&gpio 9 1>;
+               };
+       };
+};