lantiq: make dts files and kernel config kernel version specific

[openwrt/openwrt.git] / target / linux / lantiq / dts / ARV7510PW22.dts

diff --git a/target/linux/lantiq/dts/ARV7510PW22.dts b/target/linux/lantiq/dts/ARV7510PW22.dts
deleted file mode 100644 (file)
index dc3f614..0000000
--- a/target/linux/lantiq/dts/ARV7510PW22.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
-       model = "Astoria Networks ARV7510PW22";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-
-               led-dsl = &internet;
-               led-usb = &umts;
-               led-wifi = &wlan;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       sram@1F000000 {
-               vmmc@107000 {
-                       status = "okay";
-                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       fpi@10000000 {
-               localbus@0 {
-                       nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x1000000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partitions {
-                                       compatible = "fixed-partitions";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       partition@0 {
-                                               label = "uboot";
-                                               reg = <0x00000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       partition@40000 {
-                                               label = "uboot_env";
-                                               reg = <0x40000 0x20000>;
-                                               read-only;
-                                       };
-
-                                       partition@60000 {
-                                               label = "firmware";
-                                               reg = <0x60000 0xf80000>;
-                                       };
-
-                                       boardconfig: partition@fe0000 {
-                                               label = "board_config";
-                                               reg = <0xfe0000 0x20000>;
-                                               read-only;
-                                       };
-                               };
-                       };
-               };
-
-               gpio: pinmux@E100B10 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-
-                       state_default: pinmux {
-                               exin {
-                                       lantiq,groups = "exin1";
-                                       lantiq,function = "exin";
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <0>;
-                               };
-                               pci_in {
-                                       lantiq,groups = "req1", "req2";
-                                       lantiq,function = "pci";
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <0>;
-                               };
-                               pci_out {
-                                       lantiq,groups = "gnt1";
-                                       lantiq,function = "pci";
-                                       lantiq,output = <1>;
-                               };
-                               pci_rst {
-                                       lantiq,pins = "io21";
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <1>;
-                               };
-                               pins_out {
-                                       lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
-                                       lantiq,output = <1>;
-                               };
-                               pins_in {
-                                       lantiq,pins = "io11", "io12", "io28";
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <0>;
-                               };
-                       };
-               };
-
-               ifxhcd@E101000 {
-                       status = "okay";
-                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               etop@E180000 {
-                       /* Switch reset 19 */
-                       phy-mode = "mii";
-                       mtd-mac-address = <&boardconfig 0x16>;
-               };
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               restart {
-                       label = "restart";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               internet: internet {
-                       label = "internet";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               wlan: wlan {
-                       label = "wlan";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-               };
-               umts: 3g {
-                       label = "3g";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-               message {
-                       label = "message";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       interrupt-map = <
-               0x7000 0 0 1 &icu0 30
-               0x7800 0 0 1 &icu0 135
-               0x7800 0 0 2 &icu0 135
-               0x7800 0 0 3 &icu0 135
-       >;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0x3>;
-
-       wifi@1814,3592 {
-               compatible = "pci1814,3592";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-       };
-};