+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
-
- led-usb = &usb1;
- led-usb2 = &usb2;
- };
-
- memory@0 {
- reg = <0x0 0x4000000>;
- };
-
- fpi@10000000 {
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin3 {
- lantiq,groups = "exin3";
- lantiq,function = "exin";
- };
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- };
- nand {
- lantiq,groups = "nand cle", "nand ale",
- "nand rd", "nand rdy";
- lantiq,function = "ebu";
- };
- mdio {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- pci {
- lantiq,groups = "gnt1", "req1";
- lantiq,function = "pci";
- };
- conf_out {
- lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
- "io4", "io5", "io6", /* stp */
- "io21",
- "io33";
- lantiq,open-drain;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- conf_in {
- lantiq,pins = "io39", /* exin3 */
- "io48"; /* nand rdy */
- lantiq,pull = <2>;
- };
- };
- pins_spi_default: pins_spi_default {
- spi_in {
- lantiq,groups = "spi_di";
- lantiq,function = "spi";
- };
- spi_out {
- lantiq,groups = "spi_do", "spi_clk",
- "spi_cs4";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
- };
-
- stp: stp@E100BB0 {
- compatible = "lantiq,gpio-stp-xway";
- reg = <0xE100BB0 0x40>;
- #gpio-cells = <2>;
- gpio-controller;
-
- lantiq,shadow = <0xffff>;
- lantiq,groups = <0x7>;
- lantiq,dsl = <0x3>;
- lantiq,phy1 = <0x7>;
- lantiq,phy2 = <0x7>;
- /* lantiq,rising; */
- };
-
- ifxhcd@E101000 {
- status = "okay";
- gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
- lantiq,portmask = <0x3>;
- };
- };
-
- gphy-xrx200 {
- compatible = "lantiq,phy-xrx200";
- firmware1 = "lantiq/xrx200_phy11g_a14.bin";
- firmware2 = "lantiq/xrx200_phy11g_a22.bin";
- phys = [ 00 01 ];
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-/* reset {
- label = "reset";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };*/
- paging {
- label = "paging";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "easy80920:green:power";
- gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- warning {
- label = "easy80920:green:warning";
- gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
- };
- fxs1 {
- label = "easy80920:green:fxs1";
- gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
- };
- fxs2 {
- label = "easy80920:green:fxs2";
- gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
- };
- fxo {
- label = "easy80920:green:fxo";
- gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
- };
- usb1: usb1 {
- label = "easy80920:green:usb1";
- gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
- };
- usb2: usb2 {
- label = "easy80920:green:usb2";
- gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
- };
- sd {
- label = "easy80920:green:sd";
- gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
- };
- wps {
- label = "easy80920:green:wps";
- gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi {
- pinctrl-names = "default";
- pinctrl-0 = <&pins_spi_default>;
-
- status = "ok";
-
- m25p80@4 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <4 0>;
- spi-max-frequency = <1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x10000>;
- label = "ENV_MAC";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "DPF";
- read-only;
- };
-
- partition@40000 {
- reg = <0x40000 0x10000>;
- label = "NVRAM";
- read-only;
- };
-
- partition@500000 {
- reg = <0x50000 0x003a0000>;
- label = "kernel";
- };
- };
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- };
-
- wan: interface@1 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- lantiq,wan;
-
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
projects / openwrt / openwrt.git / blobdiff