lantiq: kernel 4.14: update dts files

[openwrt/openwrt.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / P2812HNUFX.dtsi

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi
index 4d61d8e9235b8962f0771a42385471d11c04be39..03858afef41eab4d8bd0fdc35fe88d715988104e 100644 (file)
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi
@@ -1,6 +1,7 @@
 #include "vr9.dtsi"
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
 
 / {
        compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
@@ -23,13 +24,6 @@
                reg = <0x0 0x8000000>;
        };
 
-       gphy-xrx200 {
-               compatible = "lantiq,phy-xrx200";
-               firmware1 = "lantiq/xrx200_phy11g_a14.bin";     /*VR9 1.1*/
-               firmware2 = "lantiq/xrx200_phy11g_a22.bin";     /*VR9 1.2*/
-               phys = [ 00 01 ];
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -102,6 +96,18 @@
                        gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
                };
        };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
 };
 
 &eth0 {
@@ -174,6 +180,14 @@
        };
 };
 
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
 &gpio {
        pinctrl-names = "default";
        pinctrl-0 = <&state_default>;
@@ -264,13 +278,20 @@
        lantiq,phy2 = <0x0>;
 };
 
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb_phy1 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
 &usb0 {
        status = "okay";
-       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-       lantiq,portmask = <0x3>;
 };
 
 &usb1 {
        status = "okay";
-       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 };