+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
- model = "Astoria Networks ARV7518PW";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &online_green;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power_green: power {
- label = "green:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- dsl: dsl {
- label = "green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- online_green: online {
- label = "green:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "green:wlan";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- power_red: power2 {
- label = "red:power";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- online2 {
- label = "red:internet";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "green:usb";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "green:voip";
- gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
- };
- fxs1 {
- label = "green:phone1";
- gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "green:phone2";
- gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
- };
- unlabeled {
- label = "amber:unlabeled";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "amber:wps";
- gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
- };
- wps2 {
- label = "green:wps";
- gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
- };
- wps3 {
- label = "red:wps";
- gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- leds {
- lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
- lantiq,output = <1>;
- };
- keys {
- lantiq,pins = "io28", "io30";
- lantiq,output = <0>;
- lantiq,pull = <2>;
- lantiq,open-drain = <1>;
- };
- };
-};
-
-/*
-#define SWITCH_RESET 13
-*/
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "u-boot-env";
- reg = <0x10000 0x10000>;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7d0000>;
- };
-
- boardconfig: partition@400000 {
- label = "boardconfig";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x0>;
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- lantiq,external-clock;
- req-mask = <0xf>;
-
- wifi@168c,0029 {
- compatible = "pci168c,0029";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
-};