+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
- model = "BT Home Hub 5A";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_blue;
- led-upgrade = &power_blue;
-
- led-dsl = &broadband_blue;
- led-wifi = &wireless_blue;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- restart {
- label = "restart";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER2>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- /* broadband-* is a single RGB led */
- broadband-red {
- label = "red:broadband";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
- broadband-green {
- label = "green:broadband";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- broadband_blue: broadband-blue {
- label = "blue:broadband";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- /* wireless-* is a single RGB led */
- wireless-red {
- label = "red:wireless";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- wireless-green {
- label = "green:wireless";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
- wireless_blue: wireless-blue {
- label = "blue:wireless";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- /* power-* is a single RGB led */
- power_red: power-red {
- label = "red:power";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- power_green: power-green {
- label = "green:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_blue: power-blue {
- label = "blue:power";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- dimmed {
- label = "dimmed";
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci_rst {
- lantiq,pins = "io21";
- lantiq,output = <1>;
- lantiq,open-drain;
- };
- pcie_rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- lantiq,open-drain;
- };
- usb_vbus {
- lantiq,pins = "io33";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&localbus {
- flash@1 {
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <0x1 0x0 0x2000000>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- nand-on-flash-bbt;
- nand-ecc-strength = <3>;
- nand-ecc-step-size = <256>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0xa0000>;
- read-only;
- };
- partition@a0000 {
- label = "u-boot-env";
- reg = <0xa0000 0x20000>;
- read-only;
- };
- partition@c0000 {
- label = "unused";
- reg = <0xc0000 0x40000>;
- };
- partition@100000 {
- label = "ubi";
- reg = <0x100000 0x7e80000>;
- };
- /*
- * last 512 KiB are for the bad block table, not writable
- */
- };
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@168c,002d {
- compatible = "pci168c,002d";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- qca,disable-5ghz;
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};