+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
- model = "Buffalo WBMR-300HPD";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_g;
- led-failsafe = &diag_r;
- led-running = &power_g;
- led-upgrade = &power_g;
-
- led-dsl = &dsl;
- led-internet = &router_g;
- led-wifi = &wifi_g;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- power {
- label = "power";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- auto {
- label = "auto";
- gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- router {
- label = "router";
- gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- diag_r: diag_r {
- label = "red:diag";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default_state = "off";
- };
-
- wifi_g: wifi_g {
- label = "green:wifi";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- dsl: dsl {
- label = "dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
- };
-
- router_y: router_y {
- label = "yellow:router";
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- };
-
- wifi_y: wifi_y {
- label = "yellow:wifi";
- gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
- };
-
- lan1: lan1 {
- label = "green:lan1";
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan: wan {
- label = "green:wan";
- gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- };
-
- lan3: lan3 {
- label = "green:lan3";
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- };
-
- lan2: lan2 {
- label = "green:lan2";
- gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
- };
-
- internet_g: internet_g {
- label = "green:internet";
- gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
- };
-
- internet_y: internet_y {
- label = "yellow:internet";
- gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
- };
-
- router_g: router_g {
- label = "green:router";
- gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
- };
-
- power_g: power_g {
- label = "green:power";
- gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- phy-rst {
- lantiq,pins = "io42";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <20000000>;
-
- partitions {
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x10000>;
- label = "u-boot";
- read-only;
- };
-
- partition@10000 {
- reg = <0x10000 0x10000>;
- label = "gphyfirmware";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x80000>;
- label = "dsl_fw";
- };
-
- partition@de0000 {
- reg = <0xa0000 0xf40000>;
- label = "firmware";
- };
-
- partition@fe0000 {
- reg = <0xfe0000 0x10000>;
- label = "sysconfig";
- read-only;
- };
-
- partition@ff0000 {
- reg = <0xff0000 0x2000>;
- label = "u-boot-env";
- };
-
- partition@ff3000 {
- reg = <0xff3000 0x2000>;
- label = "board_config";
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
projects / openwrt / openwrt.git / blobdiff