lantiq: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / lantiq / files-4.19 / arch / mips / boot / dts / lantiq / vr9_tplink_vr200.dtsi

diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
deleted file mode 100644 (file)
index 77b4f0d..0000000
--- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x7f00000>;
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
-       pinctrl-names = "default";
-
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&romfile 0xf100>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               phy-rst {
-                       lantiq,pins = "io42";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&pcie0 {
-       pcie@0 {
-               reg = <0 0 0 0 0>;
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
-               device_type = "pci";
-
-               wifi@0,0 {
-                       reg = <0 0 0 0 0>;
-                       mediatek,mtd-eeprom = <&radio 0x0000>;
-                       big-endian;
-                       ieee80211-freq-limit = <5000000 6000000>;
-                       mtd-mac-address = <&romfile 0xf100>;
-                       mtd-mac-address-increment = <2>;
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
-       status = "okay";
-
-       flash@4 {
-               compatible = "jedec,spi-nor";
-               reg = <4>;
-               spi-max-frequency = <33250000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "u-boot";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0xf90000>;
-                               label = "firmware";
-                       };
-
-                       partition@fb0000 {
-                               reg = <0xfb0000 0x10000>;
-                               label = "radioDECT";
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               reg = <0xfc0000 0x10000>;
-                               label = "config";
-                               read-only;
-                       };
-
-                       romfile: partition@fd0000 {
-                               reg = <0xfd0000 0x10000>;
-                               label = "romfile";
-                               read-only;
-                       };
-
-                       partition@fe0000 {
-                               reg = <0xfe0000 0x10000>;
-                               label = "rom";
-                               read-only;
-                       };
-
-                       radio: partition@ff0000 {
-                               reg = <0xff0000 0x10000>;
-                               label = "radio";
-                               read-only;
-                       };
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb_phy1 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-       vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
-       status = "okay";
-       vbus-supply = <&usb_vbus>;
-};