lantiq: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / lantiq / files-5.4 / arch / mips / boot / dts / lantiq / ar9_bt_homehub-v3a.dts

diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts
deleted file mode 100644 (file)
index 61a39f9..0000000
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
-       model = "BT Home Hub 3A";  /* SoC: Lantiq ar9 @ 333MHz */
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_orange;
-               led-failsafe = &power_red;
-               led-running = &power_blue;
-               led-upgrade = &power_blue;
-
-               led-dsl = &broadband_blue;
-               led-wifi = &wireless_blue;
-       };
-
-       memory@0 {                                /* RAM: Samsung K4H511638F-LC 64MB */
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               restart {
-                       label = "restart";
-                       gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               wireless-red {
-                       label = "red:wireless";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-               };
-               wireless-orange {
-                       label = "orange:wireless";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wireless_blue: wireless-blue {
-                       label = "blue:wireless";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-
-               broadband-red {
-                       label = "red:broadband";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
-               broadband-orange {
-                       label = "orange:broadband";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-               };
-               broadband_blue: broadband-blue {
-                       label = "blue:broadband";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-
-               power_red: power-red {
-                       label = "red:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-               power_orange: power-orange {
-                       label = "orange:power";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_blue: power-blue {
-                       label = "blue:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "rgmii";
-};
-
-&localbus {
-       flash@1 {                 /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <1 0x0 0x2000000 >;
-               req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-               pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
-               pinctrl-names = "default";
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "preboot";
-                               reg = <0x00000 0x8000>;
-                               read-only;
-                       };
-                       partition@8000 {
-                               label = "u-boot";
-                               reg = <0x8000 0x05c000>;
-                               read-only;
-                       };
-                       partition@64000 {
-                               label = "u-boot-env";
-                               reg = <0x64000 0x004000>;
-                       };
-                       ath9k_cal: partition@68000 {
-                               label = "art-copy";
-                               reg = <0x68000 0x004000>;
-                       };
-                       partition@6c000 {
-                               label = "kernel";
-                               reg = <0x6c000 0x200000>;
-                       };
-                       partition@26c000 {
-                               label = "ubi";
-                               reg = <0x26c000 0x1d94000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-
-       pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
-       pinctrl-names = "default";
-
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@7000 {
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-       vbus-supply = <&usb_vbus>;
-};