lantiq: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / lantiq / files-5.4 / arch / mips / boot / dts / lantiq / danube_arcadyan_arv4518pwr01.dtsi

diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
deleted file mode 100644 (file)
index 48fe88f..0000000
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
+++ /dev/null
@@ -1,200 +0,0 @@
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
-
-               led-dsl = &dsl;
-               led-internet = &online;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       ath5k_eep {
-               compatible = "ath5k,eeprom";
-               ath,eep-flash = <&boardconfig 0x400>;
-               ath,mac-offset = <0x16>;
-               ath,mac-increment = <1>;
-               ath,eep-swap;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               dsl: dsl {
-                       label = "dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               online: online {
-                       label = "online";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "wifi";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               dsl2 {
-                       label = "dsl2";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "usb";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "voice";
-                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "fxs1";
-                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "fxs2";
-                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "fxo";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       flash@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>; /* 64 KB */
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "u-boot-env";
-                               reg = <0x10000 0x10000>; /* 64 KB */
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       boardconfig: partition@3f0000 {
-                               label = "boardconfig";
-                               reg = <0x3f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-
-       gpiomm: gpio@1 {
-               compatible = "lantiq,gpio-mm";
-               reg = <1 0x0 0x10 >;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               #gpio-cells = <2>;
-               gpio-controller;
-               lantiq,shadow = <0x0>;
-       };
-};
-
-&pci0 {
-       status = "okay";
-
-       pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
-                   <&pci_req1_pins>, <&pci_req2_pins>;
-       pinctrl-names = "default";
-
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0xf>;
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&usb {
-       status = "okay";
-       vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};