lantiq: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / lantiq / files-5.4 / arch / mips / boot / dts / lantiq / danube_bt_homehub-v2b.dts

diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts
deleted file mode 100644 (file)
index 0147b3f..0000000
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts
+++ /dev/null
@@ -1,236 +0,0 @@
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
-       model = "BT Home Hub 2B";  /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_orange;
-               led-failsafe = &power_red;
-               led-running = &power_blue;
-               led-upgrade = &power_blue;
-
-               led-dsl = &broadband_blue;
-               led-wifi = &wireless_blue;
-       };
-
-       memory@0 {                                /* RAM: Samsung K4H511638F-LC 64MB */
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               findhandset {
-                       label = "findhandset";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_PHONE>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               upgrading-orange {
-                       label = "orange:upgrading";
-                       gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               phone-orange {
-                       label = "orange:phone";
-                       gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
-               };
-               phone-blue {
-                       label = "blue:phone";
-                       gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               wireless-orange {
-                       label = "orange:wireless";
-                       gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
-               };
-               wireless_blue: wireless-blue {
-                       label = "blue:wireless";
-                       gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               broadband-red {
-                       label = "red:broadband";
-                       gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
-               };
-               broadband-orange {
-                       label = "orange:broadband";
-                       gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
-               };
-               broadband_blue: broadband-blue {
-                       label = "blue:broadband";
-                       gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
-               };
-
-               power_red: power-red {
-                       label = "red:power";
-                       gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
-               };
-               power_orange: power-orange {
-                       label = "orange:power";
-                       gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               power_blue: power-blue {
-                       label = "blue:power";
-                       gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-               };
-
-               btn_in {
-                       lantiq,pins = "io2", "io15", "io22";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-       };
-};
-
-&gpios {
-       status = "okay";
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       flash@0 {                               /* NOR Flash: Spansion S29AL004D 512KB */
-               compatible = "lantiq,nor";      /* "AMD AM29LV400BB" compatible on 3.3.8 */
-               lantiq,cs = <0>;
-               bank-width = <2>;
-               reg = <0 0x0 0x80000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>; /* 256KB */
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x40000 0x10000>; /* 64KB */
-                       };
-
-                       partition@50000 {
-                               label = "rg_conf_1";
-                               reg = <0x50000 0x10000>;
-                       };
-
-                       partition@60000 {
-                               label = "rg_conf_2";
-                               reg = <0x60000 0x10000>;
-                       };
-
-                       partition@70000 {
-                               label = "rg_conf_factory";
-                               reg = <0x70000 0x10000>;
-                       };
-               };
-       };
-
-       flash@1 {                 /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <1 0x0 0x2000000 >;
-               req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-               pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
-               pinctrl-names = "default";
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       ath9k_cal: partition@0 {
-                               label = "art";     /* Atheros 9160 wifi b/g/n radio EEPROM */
-                               reg = <0x00000 0x4000>;
-                               read-only;
-                       };
-
-                       partition@4000 {
-                               label = "kernel";
-                               reg = <0x4000 0x200000>;
-                       };
-
-                       partition@164000 {
-                               label = "ubi";
-                               reg = <0x204000 0x1dfc000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-
-       pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
-       pinctrl-names = "default";
-
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@168c,0027 {
-               compatible = "pci168c,0027";
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};