lantiq: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / lantiq / files-5.4 / arch / mips / boot / dts / lantiq / vr9_arcadyan_vgv7510kw22.dtsi

diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
deleted file mode 100644 (file)
index a6206f4..0000000
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
+++ /dev/null
@@ -1,258 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-               led-upgrade = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &internet_green;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl: dsl {
-                       label = "green:dsl";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-               };
-
-               internet_red {
-                       label = "red:internet";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-               };
-
-               info_red {
-                       label = "red:info";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-
-               power_green: power {
-                       label = "green:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               info_green {
-                       label = "green:info";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-
-               internet_green: internet_green {
-                       label = "green:internet";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-
-               wifi: wifi {
-                       label = "green:wlan";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-
-               power_red: power2 {
-                       label = "red:power";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-               };
-
-               phone {
-                       label = "green:telefon";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       pinctrl-0 = <&mdio_pins>,
-                   <&gphy0_led0_pins>,
-                   <&gphy1_led0_pins>, <&gphy1_led1_pins>;
-       pinctrl-names = "default";
-
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&boardconfig 0x16>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy1>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <3>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy12>;
-               };
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy13>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy14>;
-               };
-       };
-
-       mdio {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-
-               phy1: ethernet-phy@1 {
-                       reg = <0x1>;
-                       compatible = "ethernet-phy-ieee802.3-c22";
-               };
-
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy12: ethernet-phy@12 {
-                       reg = <0x12>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy14: ethernet-phy@14 {
-                       reg = <0x14>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>, <&gphy0_led1_pins>;
-
-       state_default: pinmux {
-               pci-rst {
-                       lantiq,pins = "io21";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&localbus {
-       flash@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x1000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       boardconfig: partition@fe0000 {
-                               label = "board_config";
-                               reg = <0xfe0000 0x20000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@1814,3592 {
-               compatible = "pci1814,3592";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <1>;
-       };
-};
-
-&pcie0 {
-       status = "disabled";
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-       vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
-                        &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
-                        &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
-};