+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- /* the power led can't be controlled, use the wps led instead */
- led-boot = &led_wps;
- led-failsafe = &led_wps;
-
- led-dsl = &led_dsl;
- led-internet = &led_internet;
- led-wifi = &led_wifi;
- led-usb = &led_usb0;
- led-usb2 = &led_usb2;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wifi {
- label = "wifi";
- gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds: leds {
- compatible = "gpio-leds";
-
- /*
- power is not controllable via gpio
- */
-
- led_dsl: dsl {
- label = "green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
- };
-
- led_internet: internet {
- label = "green:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
- };
-
- led_usb0: usb0 {
- label = "green:usb";
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
-
- led_usb2: usb2 {
- label = "green:usb2";
- gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
- };
-
- led_wps: wps {
- label = "green:wps";
- gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
- };
- };
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "green:wifi";
- gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
- };
-
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
- pinctrl-names = "default";
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&ath9k_cal 0xf100>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- phy-rst {
- lantiq,pins = "io42";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&pcie0 {
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
-
- ath9k: wifi@168c,002e {
- compatible = "pci168c,002e";
- reg = <0 0 0 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- qca,no-eeprom;
- qca,disable-5ghz;
- mtd-mac-address = <&ath9k_cal 0xf100>;
- mtd-mac-address-increment = <2>;
- };
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <33250000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x7a0000>;
- label = "firmware";
- };
-
- partition@7c0000 {
- reg = <0x7c0000 0x10000>;
- label = "config";
- read-only;
- };
-
- ath9k_cal: partition@7d0000 {
- reg = <0x7d0000 0x30000>;
- label = "boardconfig";
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
projects / openwrt / openwrt.git / blobdiff