--- /dev/null
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
+ model = "AVM FRITZ!Box 7320";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &info_green;
+ led-wifi = &wlan;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ dect {
+ label = "dect";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "green:power";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ voice {
+ label = "green:fon";
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ };
+ dect {
+ label = "green:dect";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ };
+ wlan: wlan {
+ label = "green:wlan";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+ info_green: info_green {
+ label = "green:info";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+ info_red {
+ label = "red:info";
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&ath9k_cal 0xa91>;
+ mtd-mac-address-increment = <(-2)>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ath9k_cal: partition@0 {
+ label = "urlader";
+ reg = <0x00000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0xf60000>;
+ };
+
+ partition@f80000 {
+ label = "tffs (1)";
+ reg = <0xf80000 0x40000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "tffs (2)";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
+ <&pci_gnt3_pins>, <&pci_gnt4_pins>,
+ <&pci_req1_pins>, <&pci_req2_pins>,
+ <&pci_req3_pins>, <&pci_req4_pins>;
+
+ req-mask = <0xf>;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};