--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-usb = &led_usb1;
+ led-usb2 = &led_usb2;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+/* reset {
+ label = "reset";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };*/
+ paging {
+ label = "paging";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "green:power";
+ gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ warning {
+ label = "green:warning";
+ gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
+ };
+ fxs1 {
+ label = "green:fxs1";
+ gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
+ };
+ fxs2 {
+ label = "green:fxs2";
+ gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
+ };
+ fxo {
+ label = "green:fxo";
+ gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
+ };
+ led_usb1: usb1 {
+ label = "green:usb1";
+ gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
+ };
+ led_usb2: usb2 {
+ label = "green:usb2";
+ gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
+ };
+ sd {
+ label = "green:sd";
+ gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
+ };
+ wps {
+ label = "green:wps";
+ gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ wan: interface@1 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ lantiq,wan;
+
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin3 {
+ lantiq,groups = "exin3";
+ lantiq,function = "exin";
+ };
+ conf_out {
+ lantiq,pins = "io21",
+ "io33";
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ conf_in {
+ lantiq,pins = "io39"; /* exin3 */
+ lantiq,pull = <2>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "ENV_MAC";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "DPF";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "NVRAM";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x50000 0x3a0000>;
+ label = "kernel";
+ };
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+};
+
+&stp {
+ status = "okay";
+
+ lantiq,shadow = <0xffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x3>;
+ lantiq,phy1 = <0x7>;
+ lantiq,phy2 = <0x7>;
+ /* lantiq,rising; */
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};