lantiq: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / lantiq / files / arch / mips / boot / dts / lantiq / vr9_tplink_tdw89x0.dtsi

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
new file mode 100644 (file)
index 0000000..f10e3a8
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
@@ -0,0 +1,277 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               /* the power led can't be controlled, use the wps led instead */
+               led-boot = &led_wps;
+               led-failsafe = &led_wps;
+
+               led-dsl = &led_dsl;
+               led-internet = &led_internet;
+               led-wifi = &led_wifi;
+               led-usb = &led_usb0;
+               led-usb2 = &led_usb2;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RFKILL>;
+                       linux,input-type = <EV_SW>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       leds: leds {
+               compatible = "gpio-leds";
+
+               /*
+                       power is not controllable via gpio
+               */
+
+               led_dsl: dsl {
+                       label = "green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_internet: internet {
+                       label = "green:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_usb0: usb0 {
+                       label = "green:usb";
+                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_usb2: usb2 {
+                       label = "green:usb2";
+                       gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_wps: wps {
+                       label = "green:wps";
+                       gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       ath9k-leds {
+               compatible = "gpio-leds";
+
+               led_wifi: wifi {
+                       label = "green:wifi";
+                       gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "phy0tpt";
+               };
+       };
+
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
+       pinctrl-names = "default";
+
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&ath9k_cal 0xf100>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               phy-rst {
+                       lantiq,pins = "io42";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&pcie0 {
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+
+               ath9k: wifi@168c,002e {
+                       compatible = "pci168c,002e";
+                       reg = <0 0 0 0 0>;
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       qca,no-eeprom;
+                       qca,disable-5ghz;
+                       mtd-mac-address = <&ath9k_cal 0xf100>;
+                       mtd-mac-address-increment = <2>;
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@4 {
+               compatible = "jedec,spi-nor";
+               reg = <4>;
+               spi-max-frequency = <33250000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0x7a0000>;
+                               label = "firmware";
+                       };
+
+                       partition@7c0000 {
+                               reg = <0x7c0000 0x10000>;
+                               label = "config";
+                               read-only;
+                       };
+
+                       ath9k_cal: partition@7d0000 {
+                               reg = <0x7d0000 0x30000>;
+                               label = "boardconfig";
+                               read-only;
+                       };
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb_phy1 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+       status = "okay";
+       vbus-supply = <&usb_vbus>;
+};