layerscape: add LX2160ARDB (Rev2.0 silicon) board support

[openwrt/openwrt.git] / target / linux / layerscape / image / armv8_64b.mk

diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk
index c037061aa204691a176bc98cdfa3f87a7950c317..89c81e5cb48913e39fdbf1795b722182c37236c0 100644 (file)
--- a/target/linux/layerscape/image/armv8_64b.mk
+++ b/target/linux/layerscape/image/armv8_64b.mk
@@ -323,6 +323,58 @@ define Device/fsl_ls2088a-rdb
 endef
 TARGET_DEVICES += fsl_ls2088a-rdb
 
+define Device/fsl_lx2160a-rdb
+  DEVICE_VENDOR := NXP
+  DEVICE_MODEL := LX2160A-RDB
+  DEVICE_VARIANT := Rev2.0 silicon
+  DEVICE_PACKAGES += \
+    layerscape-mc \
+    layerscape-dpl \
+    layerscape-ddr-phy \
+    tfa-lx2160a-rdb \
+    restool
+  IMAGE/firmware.bin := \
+    ls-clean | \
+    ls-append $(1)-bl2.pbl | pad-to 1M | \
+    ls-append $(1)-fip.bin | pad-to 5M | \
+    ls-append $(1)-uboot-env.bin | pad-to 8M | \
+    ls-append $(1)-fip_ddr_all.bin | pad-to 10M | \
+    ls-append $(1)-mc.itb | pad-to 13M | \
+    ls-append $(1)-dpl.dtb | pad-to 14M | \
+    ls-append $(1)-dpc.dtb | pad-to 15M | \
+    ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
+    append-kernel | pad-to 32M | \
+    append-rootfs | pad-rootfs | check-size
+endef
+TARGET_DEVICES += fsl_lx2160a-rdb
+
+define Device/fsl_lx2160a-rdb-sdboot
+  $(Device/fsl-sdboot)
+  DEVICE_VENDOR := NXP
+  DEVICE_MODEL := LX2160A-RDB
+  DEVICE_VARIANT := Rev2.0 silicon SD Card Boot
+  DEVICE_PACKAGES += \
+    layerscape-mc \
+    layerscape-dpl \
+    layerscape-ddr-phy \
+    tfa-lx2160a-rdb-sdboot \
+    restool
+  DEVICE_DTS := freescale/fsl-lx2160a-rdb
+  IMAGE/sdcard.img.gz := \
+    ls-clean | \
+    ls-append-sdhead $(1) | pad-to 4K | \
+    ls-append $(1)-bl2.pbl | pad-to 1M | \
+    ls-append $(1)-fip.bin | pad-to 5M | \
+    ls-append $(1)-uboot-env.bin | pad-to 8M | \
+    ls-append fsl_lx2160a-rdb-fip_ddr_all.bin | pad-to 10M | \
+    ls-append fsl_lx2160a-rdb-mc.itb | pad-to 13M | \
+    ls-append fsl_lx2160a-rdb-dpl.dtb | pad-to 14M | \
+    ls-append fsl_lx2160a-rdb-dpc.dtb | pad-to 16M | \
+    ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+    append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+endef
+TARGET_DEVICES += fsl_lx2160a-rdb-sdboot
+
 define Device/traverse_ls1043
   DEVICE_VENDOR := Traverse
   DEVICE_MODEL := LS1043 Boards