mediatek: mt7623: rework images for U7623-02 board

[openwrt/openwrt.git] / target / linux / mediatek / image / gen_mt7623_emmc_img.sh

diff --git a/target/linux/mediatek/image/gen_mt7623_emmc_img.sh b/target/linux/mediatek/image/gen_mt7623_emmc_img.sh
deleted file mode 100755 (executable)
index b9eedf8..0000000
--- a/target/linux/mediatek/image/gen_mt7623_emmc_img.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-#
-# This script is used only to create the "legacy" image for UniElec U7623,
-# suitable for upgrading from the vendor OpenWrt or from OpenWrt 19.07.
-#
-OUTPUT_FILE=$1
-KERNEL_FILE=$2
-RECOVERY_FILE=$3
-ROOTFS_FILE=$4
-
-BS=512
-
-# These two offsets are relative to the absolute location of the kernel on the mmc
-# (0xA00), so their position in the image is -2560 blocks
-#
-# They must be kept in sync with the default command line for U7623.
-# blkdevparts=mmcblk0:3M@6M(recovery),256M@9M(root)"
-#
-# For upgrading from the vendor firmware, the total image must fit in its
-# MTD 'firmware' partition, which is typically 36MiB.
-
-# In the legacy image, the uImage starts at block 0xa00. Allow 4864 KiB (9728) blocks.
-RECOVERY_OFFSET=9728
-# The recovery image is 3MiB, or 6144 blocks.
-ROOTFS_OFFSET=15872
-
-dd bs="$BS" of="$OUTPUT_FILE" if="$KERNEL_FILE"
-dd bs="$BS" of="$OUTPUT_FILE" if="$RECOVERY_FILE" seek="$RECOVERY_OFFSET"
-dd bs="$BS" of="$OUTPUT_FILE" if="$ROOTFS_FILE" seek="$ROOTFS_OFFSET"
-dd if=/dev/zero of="$OUTPUT_FILE" bs=128k count=1 oflag=append conv=notrunc