+++ /dev/null
-From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 30 Dec 2018 23:24:41 +0100
-Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
-
-This patch apply chages for OpenWRT in P2020RDB
-dts file.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
- 1 file changed, 63 insertions(+), 35 deletions(-)
-
---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-@@ -2,6 +2,7 @@
- * P2020 RDB Device Tree Source
- *
- * Copyright 2009-2012 Freescale Semiconductor Inc.
-+ * Copyright 2018 Pawel Dembicki <paweldembicki@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
-@@ -9,10 +10,15 @@
- * option) any later version.
- */
-
-+/dts-v1/;
-+
- /include/ "p2020si-pre.dtsi"
-
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
- / {
-- model = "fsl,P2020RDB";
-+ model = "Freescale P2020RDB";
- compatible = "fsl,P2020RDB";
-
- aliases {
-@@ -38,48 +44,38 @@
- 0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
-- partition@0 {
-- /* This location must not be altered */
-- /* 256KB for Vitesse 7385 Switch firmware */
-- reg = <0x0 0x00040000>;
-- label = "NOR (RO) Vitesse-7385 Firmware";
-- read-only;
-- };
--
-- partition@40000 {
-- /* 256KB for DTB Image */
-- reg = <0x00040000 0x00040000>;
-- label = "NOR (RO) DTB Image";
-- read-only;
-- };
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-
-- partition@80000 {
-- /* 3.5 MB for Linux Kernel Image */
-- reg = <0x00080000 0x00380000>;
-- label = "NOR (RO) Linux Kernel Image";
-- read-only;
-- };
-+ partition@0 {
-+ /* This location must not be altered */
-+ /* 256KB for Vitesse 7385 Switch firmware */
-+ reg = <0x0 0x00040000>;
-+ label = "NOR (RO) Vitesse-7385 Firmware";
-+ read-only;
-+ };
-
-- partition@400000 {
-- /* 11MB for JFFS2 based Root file System */
-- reg = <0x00400000 0x00b00000>;
-- label = "NOR (RW) JFFS2 Root File System";
-- };
-+ partition@40000 {
-+ compatible = "denx,fit";
-+ reg = <0x00040000 0x00ec0000>;
-+ label = "firmware";
-+ };
-
-- partition@f00000 {
-- /* This location must not be altered */
-- /* 512KB for u-boot Bootloader Image */
-- /* 512KB for u-boot Environment Variables */
-- reg = <0x00f00000 0x00100000>;
-- label = "NOR (RO) U-Boot Image";
-- read-only;
-+ partition@f00000 {
-+ /* This location must not be altered */
-+ /* 512KB for u-boot Bootloader Image */
-+ /* 512KB for u-boot Environment Variables */
-+ reg = <0x00f00000 0x00100000>;
-+ label = "u-boot";
-+ read-only;
-+ };
- };
- };
-
-@@ -144,13 +140,43 @@
- soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-+ gpio0: gpio-controller@fc00 {
-+ };
-+
- i2c@3000 {
-+ temperature-sensor@4c {
-+ compatible = "adi,adt7461";
-+ reg = <0x4c>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c256";
-+ reg = <0x50>;
-+ };
-+
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
-+ i2c@3100 {
-+ pmic@11 {
-+ compatible = "zl2006";
-+ reg = <0x11>;
-+ };
-+
-+ gpio@18 {
-+ compatible = "nxp,pca9557";
-+ reg = <0x18>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c01";
-+ reg = <0x52>;
-+ };
-+ };
-+
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
-@@ -204,10 +230,12 @@
- phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
- reg = <0x0>;
-+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <3 1 0 0>;
- reg = <0x1>;
-+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
- tbi-phy@2 {
- device_type = "tbi-phy";
projects / openwrt / openwrt.git / blobdiff