mvebu: use device-tree board detection

[openwrt/openwrt.git] / target / linux / mvebu / base-files / etc / board.d / 02_network

diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 2c10154925b0270674e681fc909a87f7896f9b4a..f099a078b254d824f655c5c472cf9a33609c1c95 100755 (executable)
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -11,24 +11,42 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-armada-385-db-ap)
-       ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
+cznic,turris-omnia)
+       ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
+       ucidef_set_interface_wan "eth2"
+       ;;
+globalscale,espressobin)
+       ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
        ;;
-armada-385-linksys-caiman|\
-armada-385-linksys-cobra|\
-armada-385-linksys-rango|\
-armada-385-linksys-shelby|\
-armada-385-linksys-venom|\
-armada-xp-linksys-mamba)
+linksys,caiman|\
+linksys,cobra|\
+linksys,mamba|\
+linksys,rango|\
+linksys,shelby|\
+linksys,venom)
        ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
        ucidef_add_switch "switch0" \
                "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1"
        ;;
-armada-385-turris-omnia)
-       ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
-       ucidef_set_interface_wan "eth2"
+marvell,a385-db-ap)
+       ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
+       ;;
+marvell,armada8040-mcbin)
+       ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
+       ;;
+marvell,armada8040-db)
+       ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1"
+       ;;
+marvell,armada7040-db)
+       ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1"
+       ;;
+marvell,armada-3720-db)
+       ucidef_set_interfaces_lan_wan "eth1" "eth0"
+       ;;
+marvell,axp-gp)
+       ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
        ;;
-armada-388-clearfog-*)
+solidrun,clearfog*a1)
        # eth0 is standalone ethernet
        # eth1 is switch (-pro) or standalone ethernet (-base)
        # eth2 is SFP
@@ -40,24 +58,6 @@ armada-388-clearfog-*)
                ucidef_add_switch "switch0" \
                        "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6"
        ;;
-armada-xp-gp)
-       ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
-       ;;
-globalscale,espressobin)
-       ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
-       ;;
-marvell,armada-3720-db)
-       ucidef_set_interfaces_lan_wan "eth1" "eth0"
-       ;;
-marvell,armada8040-mcbin)
-       ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
-       ;;
-marvell,armada8040-db)
-       ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1"
-       ;;
-marvell,armada7040-db)
-       ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1"
-       ;;
 *)
        ucidef_set_interface_lan "eth0"
        ;;