ramips: improve BDCOM WAP2100-SK support

[openwrt/openwrt.git] / target / linux / ramips / dts / BDCOM-WAP2100-SK.dts

diff --git a/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts b/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts
index 7f9cbe74bd360024b1d89a878e16b960db395adb..62a87c844465e0d09476ba3f962a6b9fa1925b9a 100644 (file)
--- a/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts
+++ b/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts
@@ -6,9 +6,14 @@
 #include <dt-bindings/input/input.h>
 
 / {
-       compatible = "bdcom,bdcom-wap2100-sk", "ralink,mt7620a-soc";
+       compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc";
        model = "BDCOM WAP2100-SK";
 
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
@@ -19,9 +24,11 @@
                usb {
                        label = "wap2100-sk:green:usb";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
 
-               wps {
+               led_power: wps {
                        label = "wap2100-sk:green:wps";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
@@ -34,8 +41,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                wps {
@@ -55,34 +60,37 @@
 &spi0 {
        status = "okay";
 
-       en25q128@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               firmware: partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xf70000>;
+               partitions {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xf70000>;
+                       };
                };
        };
 };
@@ -123,7 +131,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                default {
-                       ralink,group = "wdt", "mdio", "spi refclk", "uartf", "wled";
+                       ralink,group = "spi refclk", "uartf", "wled";
                        ralink,function = "gpio";
                };
        };