+++ /dev/null
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "phicomm,k2p", "mediatek,mt7621-soc";
- model = "Phicomm K2P";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- leds {
- compatible = "gpio-leds";
-
- stat_r {
- label = "k2p:red:status";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- stat_y {
- label = "k2p:yellow:status";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- led_blue: stat_b {
- label = "k2p:blue:status";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "permanent_config";
- reg = <0x50000 0x50000>;
- read-only;
- };
-
- partition@a0000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0xa0000 0xf60000>;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0>;
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0xe006>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
- };
- };
-};