ramips/mt76x8: Name DTS files based on scheme

[openwrt/openwrt.git] / target / linux / ramips / dts / LINKIT7688.dts

diff --git a/target/linux/ramips/dts/LINKIT7688.dts b/target/linux/ramips/dts/LINKIT7688.dts
deleted file mode 100644 (file)
index eaa75f4..0000000
--- a/target/linux/ramips/dts/LINKIT7688.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "mediatek,linkit-smart-7688", "mediatek,mt7628an-soc";
-       model = "MediaTek LinkIt Smart 7688";
-
-       aliases {
-               led-boot = &led_wifi;
-               led-failsafe = &led_wifi;
-               led-running = &led_wifi;
-               led-upgrade = &led_wifi;
-       };
-
-       chosen {
-               bootargs = "console=ttyS2,57600";
-       };
-
-       aliases {
-               serial0 = &uart2;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x8000000>;
-       };
-
-       bootstrap {
-               compatible = "mediatek,linkit";
-
-               status = "okay";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_wifi: wifi {
-                       label = "linkit-smart-7688:orange:wifi";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               wps {
-                       label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "gpio";
-                       ralink,function = "gpio";
-               };
-
-               refclk {
-                       ralink,group = "refclk";
-                       ralink,function = "gpio";
-               };
-
-               i2s {
-                       ralink,group = "i2s";
-                       ralink,function = "gpio";
-               };
-
-               spis {
-                       ralink,group = "spis";
-                       ralink,function = "gpio";
-               };
-
-               wled_an {
-                       ralink,group = "wled_an";
-                       ralink,function = "gpio";
-               };
-
-               wdt {
-                       ralink,group = "wdt";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&wmac {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x1fb0000>;
-                       };
-               };
-       };
-
-       spidev@1 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "linux,spidev";
-               reg = <1>;
-               spi-max-frequency = <40000000>;
-       };
-};
-
-&i2c {
-       status = "okay";
-};
-
-&uart1 {
-       status = "okay";
-};
-
-&uart2 {
-       status = "okay";
-};
-
-&pwm {
-       status = "okay";
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0x28>;
-};
-
-&sdhci {
-       status = "okay";
-       mediatek,cd-high;
-};
-
-&wmac {
-       status = "okay";
-};