ramips: DTS rework

[openwrt/openwrt.git] / target / linux / ramips / dts / Y1.dtsi

diff --git a/target/linux/ramips/dts/Y1.dtsi b/target/linux/ramips/dts/Y1.dtsi
index ff9600d64d5fd57dcb55ff75cb0c2d465386a7ba..25086b03390229578c03defa43cc96fe9f6f7df7 100644 (file)
--- a/target/linux/ramips/dts/Y1.dtsi
+++ b/target/linux/ramips/dts/Y1.dtsi
@@ -4,106 +4,104 @@
        chosen {
                bootargs = "console=ttyS0,115200";
        };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 11 1>;
+                       linux,code = <0x198>;
+               };
+       };
+};
        
-       palmbus@10000000 {
-               gpio0: gpio@600 {
-                       status = "okay";
+&gpio0 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0 0>;
+               linux,modalias = "m25p80", "w25q128";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
                };
 
-               gpio2: gpio@660 {
-                       status = "okay";
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
                };
 
-               gpio3: gpio@688 {
-                       status = "okay";
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
                };
 
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "w25q128";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xfb0000>;
-                               };
-                       };
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xfb0000>;
                };
        };
+};
 
-       ehci@101c0000 {
-               status = "okay";
-       };
+&ehci {
+       status = "okay";
+};
 
-       ohci@101c1000 {
-               status = "okay";
-       };
+&ohci {
+       status = "okay";
+};
 
-       pcie@10140000 {
-               status = "okay";
+&pcie {
+       status = "okay";
 
-               pcie-bridge {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
-                               mediatek,2ghz = <0>;
-                       };
+       pcie-bridge {
+               mt76@0,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&factory 0x8000>;
+                       mediatek,2ghz = <0>;
                };
        };
+};
        
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "uartf", "wled", "nd_sd";
-                               ralink,function = "gpio";
-                       };
-
-                       pa {
-                               ralink,group = "pa";
-                               ralink,function = "pa";
-                       };
+&pinctrl {
+       state_default {
+               gpio {
+                       ralink,group = "uartf", "wled", "nd_sd";
+                       ralink,function = "gpio";
                };
-       };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 11 1>;
-                       linux,code = <0x198>;
+               pa {
+                       ralink,group = "pa";
+                       ralink,function = "pa";
                };
        };
 };