ramips: add support for Z-ROUTER ZR-2660

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_z-router_zr-2660.dts

diff --git a/target/linux/ramips/dts/mt7621_z-router_zr-2660.dts b/target/linux/ramips/dts/mt7621_z-router_zr-2660.dts
new file mode 100644 (file)
index 0000000..34b151b
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_z-router_zr-2660.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       compatible = "z-router,zr-2660", "mediatek,mt7621-soc";
+       model = "Z-ROUTER ZR-2660";
+
+       aliases {
+               label-mac-device = &gmac0;
+
+               led-boot = &led_power_green;
+               led-failsafe = &led_power_green;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_green;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               key-0 {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_WAN;
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               led-1 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_WLAN;
+                       function-enumerator = <50>;
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               led-2 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_LAN;
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               led-3 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_WLAN;
+                       function-enumerator = <24>;
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               led-4 {
+                       color = <LED_COLOR_ID_RED>;
+                       function = LED_FUNCTION_WAN;
+                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_power_green: led-5 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_POWER;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_3fff4>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_3fffa>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&nand {
+       status = "okay";
+
+       mediatek,nmbm;
+       mediatek,bmt-max-ratio = <1>;
+       mediatek,bmt-max-reserved-blocks = <64>;
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x80000>;
+                       read-only;
+               };
+
+               partition@80000 {
+                       label = "Config";
+                       reg = <0x80000 0x80000>;
+                       read-only;
+               };
+
+               partition@100000 {
+                       label = "factory";
+                       reg = <0x100000 0x80000>;
+                       read-only;
+
+                       nvmem-layout {
+                               compatible = "fixed-layout";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0xe00>;
+                               };
+
+                               macaddr_factory_3fff4: macaddr@3fff4 {
+                                       reg = <0x3fff4 0x6>;
+                               };
+
+                               macaddr_factory_3fffa: macaddr@3fffa {
+                                       reg = <0x3fffa 0x6>;
+                               };
+                       };
+               };
+
+               partition@180000 {
+                       label = "firmware";
+                       reg = <0x180000 0x7680000>;
+
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "kernel";
+                               reg = <0x0 0x400000>;
+                       };
+
+                       partition@400000 {
+                               label = "ubi";
+                               reg = <0x400000 0x7280000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+
+               mediatek,disable-radar-background;
+
+               nvmem-cells = <&eeprom_factory_0>;
+               nvmem-cell-names = "eeprom";
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2c", "jtag", "wdt";
+               function = "gpio";
+       };
+};
+
+&switch0 {
+       ports {
+               port@1 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan3";
+               };
+       };
+};