ramips: explicitly disable built-in switch when needed

[openwrt/openwrt.git] / target / linux / ramips / mt76x8 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 523071750611dc6e2c3e4569095d4f3ee1fe186a..a6543fd38fb11aec522326bddc3b556bd6a2e5de 100755 (executable)
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -11,11 +11,19 @@ ramips_setup_interfaces()
        case $board in
        alfa-network,awusfree1|\
        d-team,pbr-d1|\
+       mediatek,linkit-smart-7688|\
+       onion,omega2p|\
+       onion,omega2|\
        tama,w06|\
        tplink,re200-v2|\
        tplink,re305-v1|\
        tplink,tl-mr3020-v3|\
-       tplink,tl-wr802n-v4)
+       tplink,tl-wr802n-v4|\
+       tplink,tl-wa801nd-v5|\
+       widora,neo-16m|\
+       widora,neo-32m)
+               ucidef_add_switch "switch0"
+               ucidef_add_switch_attr "switch0" "enable" "false"
                ucidef_set_interface_lan "eth0"
                ;;
        buffalo,wcr-1166ds)
@@ -81,16 +89,6 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
-       mediatek,linkit-smart-7688|\
-       onion,omega2p|\
-       onion,omega2|\
-       tplink,tl-wa801nd-v5|\
-       widora,neo-16m|\
-       widora,neo-32m)
-               ucidef_add_switch "switch0"
-               ucidef_add_switch_attr "switch0" "enable" "false"
-               ucidef_set_interface_lan "eth0"
-               ;;
        netgear,r6120)
                ucidef_add_switch "switch0" \
                        "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"